your cz shdow loads

brit84

CGN frequent flyer
Rating - 100%
57   0   0
Location
BC
Looking around for recipes.

I have bdx 124 fmj bullets for now with hp38 on a dillon 550. Will also be using berries at some point and would like loads for their 124's.

Info for what works or you would be appreciated


Thanks!
 
I've never used hp38, but for the berry's 124gr hbrn-tp i use
4.1gr of N-320 at 1.14
4.1gr of titegroup at 1.14

both work quite well for me
 
for me and my shadow -

135 grain lead (DRG) 3.3 grains of titegroup gives me 965 FPS
147 plated bullet with 3.2 titegroup gives me very close to the same 965 FPS
I load to 1.10 OAL because that's what my pistol needs for proper feeding and reliability with the bullets that I use.
 
My Shadow likes 4.3gr of W231 with the 124gr Berry's (or CamPro: pretty much identical bullet), and an OAL of 1.087. Yup, Shadows have short chambers.
 
Although not through a shadow, my 9mm load is 124gr Berry's with 4.5gr bullseye at 1.125". I have run these through my current P99 is use for IPSC, my Jericho that i sold, and my friend's beretta 92 with perfect feeding and cycling for over 3000 rounds, not a single malfunction. I use this load in my P99 with a 4.1" barrel for IPSC and it makes 132 power factor.
 
Back
Top Bottom