Your dream rifle

I have posted pics of my dream rifle more than a few times. Bill Leeper built it in 2010.
I have owned lots since then , but this one is my ultimate dream hunting rifle.:dancingbanana:
Cat
j0Y2FfO.jpg

720irZs.jpg
 
I have posted pics of my dream rifle more than a few times. Bill Leeper built it in 2010.
I have owned lots since then , but this one is my ultimate dream hunting rifle.:dancingbanana:
Cat
j0Y2FfO.jpg

720irZs.jpg

Definitely look like a keeper! Also look like other than the action everything was made custom?!?!
 
Fortunately, I have several of my "dream" rifles:
Left Hand Sako 85 Hunters in 6.5x55 and 9.3x62;
Winchester Model 88's in 7mm-08 and 338 Federal, with the 250 Savage being done right now;
Left Hand Remington 700's in 280 Rem, 300 WSM and 338-06, with the 358 Win being done right now;
Left Hand Ruger 77's in 376 Steyr in Mannlicher stock, and 416 Taylor;
Left Hand Browning X-Bolts in 6.5 CM, with 6.5 PRC about to be done;
Marlin lever actions in 338 Marlin Express, 356 Win, and 41 Rem Mag; and
Winchester 94 Deluxe in 30-30 and Big Bore in 375 Win, both with very nice wood.

Still looking for and/or building other "dream" rifles:
Left Hand Sako L691 FS Carbine in 6.5x55, 9.3x62, and/or 280 Rem;
Left Hand Sauer FS in 7mm-08, 338 Federal and/or 358 Win;
Winchester of Browning 1885 Low Wall in 221 Fireball; and
Ruger No. 1 International in 6.5x55, 338 Federal and/or 358 Win.
 
Fortunately, I have several of my "dream" rifles:
Left Hand Sako 85 Hunters in 6.5x55 and 9.3x62;
Winchester Model 88's in 7mm-08 and 338 Federal, with the 250 Savage being done right now;
Left Hand Remington 700's in 280 Rem, 300 WSM and 338-06, with the 358 Win being done right now;
Left Hand Ruger 77's in 376 Steyr in Mannlicher stock, and 416 Taylor;
Left Hand Browning X-Bolts in 6.5 CM, with 6.5 PRC about to be done;
Marlin lever actions in 338 Marlin Express, 356 Win, and 41 Rem Mag; and
Winchester 94 Deluxe in 30-30 and Big Bore in 375 Win, both with very nice wood.

Still looking for and/or building other "dream" rifles:
Left Hand Sako L691 FS Carbine in 6.5x55, 9.3x62, and/or 280 Rem;
Left Hand Sauer FS in 7mm-08, 338 Federal and/or 358 Win;
Winchester of Browning 1885 Low Wall in 221 Fireball; and
Ruger No. 1 International in 6.5x55, 338 Federal and/or 358 Win.

Nice! As a lefty I feel your pain. Hard to find nice LH rifles!
 
I have more than one "dream" rifle, but if pinned down to one, it would be my Custom 308 Norma Magnum. (c. 2011)
M700 Magnum action, trued and touched up by Leeper
McGowen 26" medium sporter barrel, 1-10" twist, Chrome Moly. Chambered and installed by Leeper.
Triggertech primary trigger at 2-¾ lb Complete deep blue done by Leeper.
Bedded into a Remington Custom shop stock in Tiger Maple.
Limbsaver recoil pad.
Leupold VX - III 3.5-10x40 B&C in Leupold STD mounts
Truly accurate, several bullets/loads shooting well under MOA out past 600 yards.
Accounted for several head of big game. Dave.
20220128_184026.jpg
 

Attachments

  • 20220128_184026.jpg
    20220128_184026.jpg
    113.9 KB · Views: 230
Definitely look like a keeper! Also look like other than the action everything was made custom?!?!

Yup, the only thing factory on that rifle is the action frame, everything is was either manufactured by Leeper , or upgraded, like the Wolf springs and Kepplinger trigger. The front sight is is a Brno, as well.
Rear express sights are NECG.
The only thing I have to do is upgrade the scope rail, that still needs to be done.
Cat
 
Well, this was supposed to be my dream rifle, my "one gun for everything". If I weren't such a nit-picky perfectionist I'd probably be satisfied with it.

View attachment 611761

It's a 7x57, aka .275 Rigby. The biggest issue is that it turned out heavier than intended. The pitch on the buttplate is not quite right either. The dream turned into a bit of a nightmare with regards to cost overruns. You'd almost think it was a government project.

My second take on the perfect rifle is a work in progress. It started as a commercial Mauser 98 in .30/06, and will stay in .30/06 and is in the process of being rebarreled at the moment. The original barrel was too neglected. I'm doing the stock work myself, and if it turns out decently I'll post a thread when it's done, but this is the inspiration:

View attachment 611762

Wow, that's beautiful! Pretty sure the stock cost you more than my whole custom rifle. I'm not jealous though, mine is exactly what I wanted/
 
Back
Top Bottom