Yugo M57 7.62x25

[Temps]

Just picked up a M57 and some factory brass rounds from my LGS. Does anyone have reloading data for this round, right now looking like Power Pistol is the best, thoughts/sugggestions?

 

[MuthaFunk]

I've done lots of reloading for that round. What bullets are you looking at using? I've used Hornady 90gr XTP's , 86gr RN's, and 110gn 30M1 Carbine bullets by Armscor plus home cast bullets too. I have two pet loads that I make with 110gn bullets. A light shooting load using titegroup and a more proper 7.62X25 load using 2400 or H110.

 

[mbogo3]

13gr of Win 296 /Starline brass/86gr or 90XTP HP benched 15 yards dime sized with a Polish Radom Tokarev

 

[Temps]

I'm thinking of using hornady 7.62x25 (.308) 86gr sprn

 

[Beater]

try 30 carbine bullets aswell

 

[B]

If you want speed, H-110 can get you up around 1800fps with an 85grn FMJ. I wish the light FMJs were easier to find...

 

[Levon12345]

Resurrecting this thread as I'm looking for some recipes on the lighter side (I have a broomhandle and don't need the hassle of keeping hot loads quarantined). I have H110, lil gun, HS-6 and Unique on the back of the bench. Using Campro 85 grain plated bullets. I have loaded 6 grains of unique and that cycles my broomhandle and flies true to 200m no problem. Any light plinking recipes you guys have?

 

[mbogo3]

Loading for a broomhandle is totally different than the Tokarev loads..........I have data I can post after work.

 

[unstableryan]

Not that I am adding much to the conversation, but I'd pull bullets from surplus and use those cases. Mine sends them off about 25 feet at 4-5 o'clock.

 

[deadlydelta]