- Location
- Lloydminster, Alberta
Zeiss - DTI6/40 Thermal Imaging Camera - 527020-9912-000 In Stock!!!!
- Thread starter Prophet River
- Start date
Just a heads-up for anyone thinking about home inspections: this is really a hunting-focused thermal scope, not a building inspection camera.
It will still work for basic thermal scanning (heat loss, insulation gaps, drafts, HVAC anomalies, and obvious moisture patterns), because at the end of the day it’s detecting surface temperature differences. But it’s not really optimized for that kind of work.
A few practical limitations for inspection use:
For comparison, most home inspectors lean toward FLIR or Hikmicro-style building cameras because they’re
That said, the Zeiss image quality is excellent, and if someone already owns it (or uses it for hunting), it can absolutely double as a basic diagnostic tool for spotting obvious thermal issues.
Just wouldn’t pick it as a primary home inspection tool.
It will still work for basic thermal scanning (heat loss, insulation gaps, drafts, HVAC anomalies, and obvious moisture patterns), because at the end of the day it’s detecting surface temperature differences. But it’s not really optimized for that kind of work.
A few practical limitations for inspection use:
- Narrow field of view (40mm lens = more “zoomed in” than ideal for indoor scanning)
- Designed for long-range detection, not close-up wall sweeps
- No inspection/reporting workflow like dedicated building thermal cameras
- Less convenient for quickly scanning whole rooms or ceilings
For comparison, most home inspectors lean toward FLIR or Hikmicro-style building cameras because they’re
- Wider angle for room scanning
- Better at close-range focus
- Designed for interpreting building envelopes, not targets at distance
That said, the Zeiss image quality is excellent, and if someone already owns it (or uses it for hunting), it can absolutely double as a basic diagnostic tool for spotting obvious thermal issues.
Just wouldn’t pick it as a primary home inspection tool.
If you'd like to use it for inspection, let the house “stabilize” first, turn HVAC off for 10–15 minutes before scanning. Otherwise airflow from vents will mask real insulation or leakage issues and give misleading hot/cold streaks.
