Anyone shoot the S&W 460V...

they have that one to! :)

SW-460long-600.png


http://www.wanstallsonline.com/product.php?productid=2375&cat=0&page=4

That's the one I saw! Sweet Jeebus it makes my fingers numb just looking at it! WTF is up with the sling swivels anyhow!? I don't get it!?
 
The only problem I have with mine, if I am not holding FIRM the trigger guard will give my middle finger a good smack from the recoil

But that heavy of a gun shooting 45 Colts... Probably feel like you're shootin 22's
 
I have the XVR in 8 3/8". It is by far my favorite revolver. Absolutely love it. I have shot deer and hogs with it out to 70 meters with no problem. i posted a video of me shooting casulls and 460 s&w. it is the 44 mag, 454, 460 comparison on this forum.
 
Last edited:
Did pass on the 460 could not resist buying a S&W Model 29 44 mag ( Dirty Harry) from one of our dealer... JP.
 
One of our dealer have in stock those revolvers, in 5 inch and 8 and 3/8 barrel lenght, any recomendation between the 2 barrel lenght, myself is drawned to the 5 inch barrel... The fact that you can shoot the 45 Colt/ 454 Casull and the 460 S&W is a big +... Buying a 45 Colt is the next step on my list so i have interest here... Thanks... JP.

I personally prefer the balanced look of the 5" 460V with the shorter "muzzle brake"(jacketed bullets). I've shot 454 Casull thru mine but will stick to the 460Magnums for pure S&G's.
I usually bring these three to the range when I'm in the Revolver mood….plink away with the Bearcat, then the 44Mag and if the next stalls are "empty" I'll bring out the 460V for a couple of cylinders.
DSCN1256_zps3a6f96ed.jpg

DSCN1192_zps3ce4ff7e.jpg
 
I personally prefer the balanced look of the 5" 460V with the shorter "muzzle brake"(jacketed bullets). I've shot 454 Casull thru mine but will stick to the 460Magnums for pure S&G's.
I usually bring these three to the range when I'm in the Revolver mood….plink away with the Bearcat, then the 44Mag and if the next stalls are "empty" I'll bring out the 460V for a couple of cylinders.
DSCN1256_zps3a6f96ed.jpg

DSCN1192_zps3ce4ff7e.jpg

You got quite a herd of nice revolvers there... JP.
 
^ a fu<ken bi-pod! This is a photo shop joke right!?

nope, it has a picitinny rail cut into the bottom of the frame, the bipod comes stock with the gun. it also comes with a shoulder strap.


Get a bi-pod and S&B scope for it and you're set.. Will probably group as good as your AR10 ;-)

Not an S and B but here is my set up. its a Leupold vx-3 2.5 to 8 power by 32 mounted with a one of a kind custom from Canadian manufacturer Near Manufaturing. its heat treated stress relieved stainless.

cropped_gun.jpg


It is great for silhouette shooting, I can push a 200 grain shell 2500 fps easy, ive pushed 300 grain xtp mag's 1800 fps. (over a chono, not book speed) there is a lot more to be had but i don't want to put my barrel through that kind of abuse.
 
Last edited:
nope, it has a picitinny rail cut into the bottom of the frame, the bipod comes stock with the gun. it also comes with a shoulder strap.




Not an S and B but here is my set up. its a Leupold vx-3 2.5 to 8 power by 32 mounted with a one of a kind custom from Canadian manufacturer Near Manufaturing. its heat treated stress relieved stainless.

cropped_gun.jpg


It is great for silhouette shooting, I can push a 200 grain shell 2500 fps easy, ive pushed 300 grain xtp mag's 1800 fps. (over a chono, not book speed) there is a lot more to be had but i don't want to put my barrel through that kind of abuse.



Soooooo F'n cool
 
Back
Top Bottom