For that kind of money I would go custom:
Barrel ~$500
Action ~$1200-$2000
Recoil lug (if not integral) $35
Trigger $140
Stock McMillan($700-1000) or Chassis ($500-$1100)
Magazine $75
Chambering and ceracoating $500-$750
You can get into a custom for a minimum of $2950, the maximum is limitless.
That leaves you with $2050 for optics. You can either go Sightron for roughly $1100 or Nightforce for roughly $2200
Since you are just getting into it. I would lean to sightron but with the difference I would buy reloading gear, which you could easily fit within your budget.
Reloading will provide you significantly greater gains in precision in comparison to what gains you would see from buying a schmidt bender/nightforce over a sightron.
Then with the reloading gear, I would immediately pass on the .308 and go with any of the 6.5's (260, 260AI, 6.5x47, 6.5 creedmoor) or a 7mm in 284 winchester.
Barrel ~$500
Action ~$1200-$2000
Recoil lug (if not integral) $35
Trigger $140
Stock McMillan($700-1000) or Chassis ($500-$1100)
Magazine $75
Chambering and ceracoating $500-$750
You can get into a custom for a minimum of $2950, the maximum is limitless.
That leaves you with $2050 for optics. You can either go Sightron for roughly $1100 or Nightforce for roughly $2200
Since you are just getting into it. I would lean to sightron but with the difference I would buy reloading gear, which you could easily fit within your budget.
Reloading will provide you significantly greater gains in precision in comparison to what gains you would see from buying a schmidt bender/nightforce over a sightron.
Then with the reloading gear, I would immediately pass on the .308 and go with any of the 6.5's (260, 260AI, 6.5x47, 6.5 creedmoor) or a 7mm in 284 winchester.