The "What Have You Reloaded Today" thread

[bsand]

deprimed 100 308 win lapua brass, another 250 aguila 223 and 40 federal 223. Got them going in the SS tumbler.

 

[KellyP]

Loaded up 250 x 45ACP (230gr swc, 4.7gr 452AA and s&b LLP)

 

[Kevan]

Loaded a dozen rds. of 6.5 Creedmoor for load testing, half a dozen of 6.5 Rem. Mag. for same and de-primed / re-sized about 20 pieces of 28 Nosler brass..
One of those rare warm days in the shop...

 

[Got Juice?]

Loaded 5 rounds of 357SIG

Roll Sized 25,000 .40 brass, 15,000 357SIG brass

 

[SURESHOT73]

150 rounds of 9mm, 124gr Cam pro, 4.6gr of Win 231.

 

[Hirsch_Creek]

For my '06 load tests some 110 Sierra HP's
H4895, 5 rounds of each, 52gr, 54gr, 56gr and some 57's as well. Range time!

 

[Luis1]

Loaded up 175 rnds of some hornady 60gr v-max 223 with 23.8 gr of h335. Group very nicely and consistently for my tavor. As well as almost 400 rnds of 223 55gr plinking ammo with 24.2-24.6 gr of imr 4895, because my thrower won't measure that type of powder consistently and I'm not scrutinizing every round when making plinking ammo. I bought the imr 4895 last year for 34$ a lb when powder was scarce so not too bad I guess. Shoots decently too for plinking ammo.

I also resized and deprimed 2000 ish 223. This was all done over the past few days when I had some time. Need to invest in a progressive press at some point lol. Not looking forward to reaming the primer pockets. All of that brass is federal brass with crimped pockets ugh..

 

[bsand]

Loaded up 175 rnds of some hornady 60gr v-max 223 with 23.8 gr of h335. Group very nicely and consistently for my tavor. As well as almost 400 rnds of 223 55gr plinking ammo with 24.2-24.6 gr of imr 4895, because my thrower won't measure that type of powder consistently and I'm not scrutinizing every round when making plinking ammo. I bought the imr 4895 last year for 34$ a lb when powder was scarce so not too bad I guess. Shoots decently too for plinking ammo.

I also resized and deprimed 2000 ish 223. This was all done over the past few days when I had some time. Need to invest in a progressive press at some point lol. Not looking forward to reaming the primer pockets. All of that brass is federal brass with crimped pockets ugh..

Pocket swager was best investment I made for 223. Every bras case I've got has crimped pockets. I went with the RCBS one.

 

[Luis1]

Pocket swager was best investment I made for 223. Every bras case I've got has crimped pockets. I went with the RCBS one.

Yea same here, I'm going to start looking into one I think. I find once in a while I over ream and the primer seats a tad too deep, waste of a case. A swager, I know, will stop that from happening and be much easier on my hands lol. They get cramped after several hundred cases lol.

 

[silverfoxdj]

500 rounds of 38 spl HBWC using berrys bullets..very accurate rounds

 

[Hoakster]

500 rounds of 40 S&W: 180gr CamPro RN over 6.6gr of HS-6, then another 150 rounds at 6.9gr.

 

[Santoneski]

............

 

[Evil_Dark]

Hi there!

Yesterday I did 50 rounds of my Nosler Accubond for my 30-06, 45.5gr of IMR-4895.
Here's the results at 100 yards, fired this morning (what a good way to start the day!!)


At 200Yards:


Evil_Dark

 

[Evil_Dark]

For my '06 load tests some 110 Sierra HP's
H4895, 5 rounds of each, 52gr, 54gr, 56gr and some 57's as well. Range time!

How are your groupings with the 110's? I always wanted to developp a load with light bullets for my 30-06.

Evil_Dark

 

[bearcub]

7MM Mauser still tweaking a load for it. Adjusting length and different primers to try to tighten the group

 

[kevinc]

Loaded up 15 300Wby with RL25 and 200gr Speer SP to try out

 

[jongun]

Loaded up 100 each of 223(M4), 9mm(Sig P250) and 45ACP(Norc 1911). Good god I need a progressive press.

 

[Mobular]

Well, I dropped in to WWS today to grab a few hundred large pistol primers as they are currently on sale. It turned out to be a no sale day as I refused to participate in their own private component registry...so... I reloaded nothing today!

 

[bsand]

Primers aren't even controlled.....

Swaged 200 223 cases. Set up FL die to bump shoulder back 4thousands (ar loads). Made 5 dummy rounds and they cycled with no issues.

 

[laker415]

Well, I dropped in to WWS today to grab a few hundred large pistol primers as they are currently on sale. It turned out to be a no sale day as I refused to participate in their own private component registry...so... I reloaded nothing today!

That's weird. I didn't fill out anything at my location when buying primers.