. . .
I have never owned a #1, but have been longing for one in a 'tropical' calibre.
. . .
If you ever do get a #1 Tropical, be sure to check the bedding of the receiver at the tang; chances are its uneven, and will cause the stock to split in short order. When you send the rifle out for warranty, they will replace the butt stock, but its color and grain won't match the wood on the forend, and they won't address the uneven bedding, so it too will split after just a few rounds.
That was the story for my .416 Rigby. But once the uneven bedding issue was addressed, a half inch was removed from the LOP, and a custom quarter rib was installed so I could mount the scope far enough forward that the ocular was even with the leading edge of the falling block, the rifle was perfect for me. From then on it, and I, simply shrugged off the effects of the heavy recoiling loads that I subjected us to.
At that time the #1 was the least expensive medium/big bore rifle available, I think it was about $1K in the late '90s, but since that time I have focused only on repeaters, which are better suited for my purposes, but that don't carry nearly as well at the balance. One of the idiocracies of that rifle was that after several hours on the trail, whenever I unslung it, the safety had invariably moved to the fire position. While it never resulted in an accident, the thought of a .416 booming a few inches from my ear was disconcerting, so I acquired the habit of carrying the rifle slung muzzle down, and made sure no one ever walked on my left side.
My idea at the time as to acquire another in 7X57, have it restamped ".275 Rigby" and thus would have a brace of Rigbys that would cover any shooting chore I was likely to encounter with a hunting rifle.