when you come up with a good idea to cut it up.
I'm thinking a sharp wide chisel with a sledge hammer or a splitting axe with a sledge hammer , what say you?
Going to pull out my old chainsaw, see if still goes.
when you come up with a good idea to cut it up.
I'm thinking a sharp wide chisel with a sledge hammer or a splitting axe with a sledge hammer , what say you?
What about Cheese wax
As far as I can tell Cheese wax is Bees wax?
M
What is beeswax used for? Was going to start keeping this year, and have never heard of a gun-related application. Very cool to hear, though. Thx
Nope. formulation of paraffin and microcrystalline wax, food grade coloring
So the same stuff they use for canning jams etc?
M
when you come up with a good idea to cut it up.
I'm thinking a sharp wide chisel with a sledge hammer or a splitting axe with a sledge hammer , what say you?
You guys are talking about that boat keel correct? Not wax.
M
Use a piece of PVC pipe and a dowel for your mold.. I believe there is a sticky on Castbollits on this
http://castboolits.gunloads.com/forumdisplay.php?58-Boolit-Lube-!
found it
the 2nd's bees wax goes for much cheaper.
Use a piece of PVC pipe and a dowel for your mold..
I was told that if being used as a flux when casting, a wax toilet ring works just as well and is much cheaper.
Mine has all the crud in the bottom 1/4 inch. But it cost $20 for 25 lbs.What is "2nd's bees wax"?
M