New STI Spartans are pretty nice :)

7x61

BANNED
BANNED
BANNED
EE Expired
Rating - 99.1%
317   3   1
Location
BC
Well, the STI Spartans are here and a few pleasant surprises - they come with the top of the line hammers and sears from the STI wide-body guns!! Triggers are the nice carbon-fiber ones, too, barrels look great, and the frame to slide fit is superb :) The mag (they only come with one, as do other STI's) is a Novak's 8 rounder - a very good mag. The rear sight is an LPA and actually a little nicer than the STI/Bomar on the Trojan. These guns have an attractive and tough Parkerized finish, the grips don't have the STI logo but are at least as pretty. Not quite as "reddish", but very nice and suit the finish on the gun better. The mag well has a slightly more aggressive bevel. Internals look to be very well fitted. Feel is very good, and the trigger pull is a little heavy but crisper than most Trojans as they come. Easy to lighten up with those lovely hammers and sears :) Now test fired! The test gun was very accurate and reliable :) I got under 2" at 25 Meters under awful conditions... I know I keep comparing these to the Trojans which I really like (and sell a lot of ), but it's really unfair to compare to other guns in the under $800 range because none of them even come close. A Mil-spec Springfield? Not a chance! A tricked out Norinco? Wellll....Have to be awfully tricked out at a cost of over $1000 to even approach this :)
Drawbacks? Well, the front grip strap is standard GI style, not slightly raised like the other STI single-stacks, the gun comes in .45 only (so far)..... Gee, that's about it that I can see :)

Gunnar

www.armco-guns.com


STI%20Spartan%20%203.JPG

STI%20Spartan%20%208.JPG

STI%20Spartan%20%201.JPG

STI%20Spartan%20%206.JPG

STI%20Spartan%20%207.JPG

STI%20Spartan%20%205.JPG
 
I do not have a problem with cast frames and I have had great luck with my RIA (see below). Lastly, I am confident that when STI puts their logo on something it will work well, they just have too much to lose by endorsing junk. Regards, Richard :D

e9dfe474.jpg
 
Gunnar, will other sti parts fit the Spartan?

Thanks


Yes, they will - in fact a LOT of the parts appear to be STI-made.

The frames, slides and barrels are made by Armscor in the Philippines, I'm told, and are indeed investment castings (like Para Ordnance and CZ - both brands I highly admire). I really like these guns, but to get one in 9mm, you need to talk to me about a Trojan :)

Gunnar
www.armco-guns.com
 
Yes, they will - in fact a LOT of the parts appear to be STI-made.

The frames, slides and barrels are made by Armscor in the Philippines, I'm told, and are indeed investment castings (like Para Ordnance and CZ - both brands I highly admire). I really like these guns, but to get one in 9mm, you need to talk to me about a Trojan :)

Gunnar
www.armco-guns.com
Even the barrels are cast? :eek: Are you sure?
 
Back
Top Bottom