Ruger PC Carbine
- Thread starter wayupnorth
- Start date
- Status
wayupnorth
CGN Ultra frequent flyer
- Location
- Northern Alberta
no, and unless they where giving it away why on earth would you buy a restricted version?
wayupnorth
CGN Ultra frequent flyer
- Location
- Northern Alberta
there are 3 main 'restricted' versions listed on Ruger.com
19100 is the normal with threaded fluted barrel and 17 round magazine.
19101 is the non threaded barrel with 10 round magazine (i believe they call that the California or Massachusetts version?)
19102 is threaded with a 10 round magazine.
19103 is the Canadian version with the longer threaded fluted barrel and 10 round magazine.
so looks like you got the 19101
19100 is the normal with threaded fluted barrel and 17 round magazine.
19101 is the non threaded barrel with 10 round magazine (i believe they call that the California or Massachusetts version?)
19102 is threaded with a 10 round magazine.
19103 is the Canadian version with the longer threaded fluted barrel and 10 round magazine.
so looks like you got the 19101
In case anyone's wondering
For lefties the Ruger 10/22 left hand safety's work great.
Pretty hard to find them in Canada so I ordered one from numrich. Ended up being quite reasonable about 50$ shipped to Canada.
With the bolt handle on the right side and the magazine release on the right side and a left handed safety this rifle is perfectly set up for lefties.
Unfortunately only newer Glock magazines with the ambi mag cutouts work with the magazine release on the right side. Which means most of my Glock 17 and 19 gen 3 mags don't work. I ordered a bunch of Magpul mags and they have worked flawlessly.
Actually I haven't had a single malfunction with this rifle. Only about 300rds through it so far.
I'm going to have to get a progressive press to keep up with the PC carbine and my 3 9mm Glocks. Setting one up will be my winter project!
For lefties the Ruger 10/22 left hand safety's work great.
Pretty hard to find them in Canada so I ordered one from numrich. Ended up being quite reasonable about 50$ shipped to Canada.
With the bolt handle on the right side and the magazine release on the right side and a left handed safety this rifle is perfectly set up for lefties.
Unfortunately only newer Glock magazines with the ambi mag cutouts work with the magazine release on the right side. Which means most of my Glock 17 and 19 gen 3 mags don't work. I ordered a bunch of Magpul mags and they have worked flawlessly.
Actually I haven't had a single malfunction with this rifle. Only about 300rds through it so far.
I'm going to have to get a progressive press to keep up with the PC carbine and my 3 9mm Glocks. Setting one up will be my winter project!
wayupnorth
CGN Ultra frequent flyer
- Location
- Northern Alberta
how did i not know there was a left handed safety for the 10/22?!?!??!
I'm really surprised they aren't more common in Canada.
I couldn't find a single one up here.
Brownell's stocks one but they won't ship it to Canada.
Numrich was the only place I found that would ship up here
Did you bother reading up on Questar before you ordered? Good chance you may never see it...
I'm not being negative, get over yourself.
https://www.canadiangunnutz.com/forum/showthread.php/1904274-Is-Questar-still-open
https://www.canadiangunnutz.com/forum/showthread.php/1904274-Is-Questar-still-open
The existing barrels free float. The change is the competition style fore end.
Take Care
Bob
Al Flaherty's has the free float M-LOK model up on their site under pending deliveries. It is marked as temporarily sold out but the listing says "Expected at the end of the third or beginning of the fourth quarter of 2019".
Hopefully we see them in the next couple of weeks based on that estimate, have had my eye on this model since it was announced.
Hopefully we see them in the next couple of weeks based on that estimate, have had my eye on this model since it was announced.
LordEvilPepper
CGN Ultra frequent flyer
- Location
- Under a rusty barge in BC
So is anyone having stove pipe issues with these or is it just me?
I find this gun is so fouled up after 100 rounds it has to come apart and get scrubbed out to function properly again. The bolt and chamber are just coated in a layer of hard carbon. I know blow backs are dirty but even the cases are coming out black on 2/3 the outside of the case after 100 rounds.
The brass is so chewed up ejecting out of this thing when its fouled its about 50% scrap.
Same results with pmc and umc ammo, im running glock factory mags
I find this gun is so fouled up after 100 rounds it has to come apart and get scrubbed out to function properly again. The bolt and chamber are just coated in a layer of hard carbon. I know blow backs are dirty but even the cases are coming out black on 2/3 the outside of the case after 100 rounds.
The brass is so chewed up ejecting out of this thing when its fouled its about 50% scrap.
Same results with pmc and umc ammo, im running glock factory mags
Nope not here. I use lead bullets in mine with no issues at all. Cases come out black but that is just from the blow back action. Cases are dirty, as one would expect but fine for reloading. I only have about 300 rounds on mine at this point. Mine has to fight for range time with my two other carbines.
Take Care
Bob
- Status
