Maple Ridge Armourer
CGN frequent flyer
The highly anticipated, MRA Maverick receiver kit pre-order is now available!
MSRP $899.95 pre-order
50% Deposit required
Delivery estimated for March 2021
Description
The MRA Maverick is a novel, spring assisted, straight pull, magazine fed firearm design. It is composed of a proprietary receiver, bottom metal, and proprietary bolt carrier with integrated, swap-able left or right hand charging handle. This builder kit is compatible with a wide variety of commonly available firearm parts and accessories. In this way, the user can build a rifle to meet their specific utility and budget.
The Maverick is designed and intended to not be capable of discharging ammunition in a semi-automatic fashion. The design is novel and is not derived from any restricted or prohibited firearm. Due to the action type and novel design, this firearm meets the legal standard of a non-restricted firearm as per the Canadian Firearms Act and related Regulations. The minimum overall length when assembled into a working firearm must be over 26″ to meet the standard of non-restricted.
We recommend using our MRA Maverick Barrel Torque Rod when assembling or performing work on the Maverick.
Features:
Spring-assisted, manually-operated, straight-pull bolt action
Side-charging handle can be mounted to Left or Right side (ejects to the Right always)
Can be readily assembled to shoot 308 Win, 6.5 Creedmoor, and many other cartridges
Integrated QD port at the rear
Compatible with fixed butt stocks
Extra-flared magwell
Integrated Mechanical Bolt Catch
Designed and manufactured entirely in Canada
Specifications:
Receiver and Bottom Metal Material: High quality, domestically sourced 6061-T6 alloy
Receiver and Bottom Metal Finish: Hard Black Anodizing
Bolt Carrier Material: HTSR 4140 steel
Bolt Carrier Finish: QPQ Black Nitride
Caliber: Multi
Weight: 2 Lbs (Not including Gas Journal Seal)
Optional Cerakote colurs by Red Tower Armoury
Included Components:
(1) MRA Maverick Receiver
(1) MRA Maverick Bottom Metal
(1) MRA Maverick Bolt Carrier (requires bolt, firing pin, cam pin, and retaining pin)
(1) MRA Maverick Cylinder Charging Handle
(1) MRA Maverick End Plate
(1) MRA Maverick Barrel Gas Journal Seal .750″ diameter (allows the use of various aftermarket barrels with a gas port)
(2) MRA Maverick Flush Fit Takedown Pins
(1) MRA Maverick Rear Takedown Pin Spring
(1) MRA Maverick Threaded Bolt Catch Pin
Required Components:
Barrel, bolt, handguard, buttstock, lower parts kit, muzzle device
Compatible with:
An abundance and variety of standardized barrels, buttstocks, handguards, pistol grips, magazines, etc.
Not compatible with:
AR-10 bolt carriers, AR-10 upper receivers, AR-10 lower receivers, AR-10 charging handles
Made in Canada
MSRP $899.95 pre-order
50% Deposit required
Delivery estimated for March 2021
Description
The MRA Maverick is a novel, spring assisted, straight pull, magazine fed firearm design. It is composed of a proprietary receiver, bottom metal, and proprietary bolt carrier with integrated, swap-able left or right hand charging handle. This builder kit is compatible with a wide variety of commonly available firearm parts and accessories. In this way, the user can build a rifle to meet their specific utility and budget.
The Maverick is designed and intended to not be capable of discharging ammunition in a semi-automatic fashion. The design is novel and is not derived from any restricted or prohibited firearm. Due to the action type and novel design, this firearm meets the legal standard of a non-restricted firearm as per the Canadian Firearms Act and related Regulations. The minimum overall length when assembled into a working firearm must be over 26″ to meet the standard of non-restricted.
We recommend using our MRA Maverick Barrel Torque Rod when assembling or performing work on the Maverick.
Features:
Spring-assisted, manually-operated, straight-pull bolt action
Side-charging handle can be mounted to Left or Right side (ejects to the Right always)
Can be readily assembled to shoot 308 Win, 6.5 Creedmoor, and many other cartridges
Integrated QD port at the rear
Compatible with fixed butt stocks
Extra-flared magwell
Integrated Mechanical Bolt Catch
Designed and manufactured entirely in Canada
Specifications:
Receiver and Bottom Metal Material: High quality, domestically sourced 6061-T6 alloy
Receiver and Bottom Metal Finish: Hard Black Anodizing
Bolt Carrier Material: HTSR 4140 steel
Bolt Carrier Finish: QPQ Black Nitride
Caliber: Multi
Weight: 2 Lbs (Not including Gas Journal Seal)
Optional Cerakote colurs by Red Tower Armoury
Included Components:
(1) MRA Maverick Receiver
(1) MRA Maverick Bottom Metal
(1) MRA Maverick Bolt Carrier (requires bolt, firing pin, cam pin, and retaining pin)
(1) MRA Maverick Cylinder Charging Handle
(1) MRA Maverick End Plate
(1) MRA Maverick Barrel Gas Journal Seal .750″ diameter (allows the use of various aftermarket barrels with a gas port)
(2) MRA Maverick Flush Fit Takedown Pins
(1) MRA Maverick Rear Takedown Pin Spring
(1) MRA Maverick Threaded Bolt Catch Pin
Required Components:
Barrel, bolt, handguard, buttstock, lower parts kit, muzzle device
Compatible with:
An abundance and variety of standardized barrels, buttstocks, handguards, pistol grips, magazines, etc.
Not compatible with:
AR-10 bolt carriers, AR-10 upper receivers, AR-10 lower receivers, AR-10 charging handles
Made in Canada
Attachments
Last edited:
