I ran one for a while. It wasn’t a huge issue but something to work around for sure. I had both of mine going left.
When flipped down you had to purposely go under it which was a bit awkward.
The T97 Thread!
- Thread starter Clobbersauras
- Start date
I ran one for a while. It wasn’t a huge issue but something to work around for sure. I had both of mine going left.
When flipped down you had to purposely go under it which was a bit awkward.
commissar_lubi
CGN Regular
If the FTU had an SVT/SKS style charging handle, it'd probably be easier to grasp it with your knuckles facing up. That way, your arm wouldn't be as impeded by a magnifier.
In any case, if it's really too awkward, I might just switch my CH back to the left and let the magnifier flip to the right.
Last edited:
421SuperDuty
Regular
- Location
- 中华人民共和国加拿大省
How is the spare parts situation? If something breaks, how do you repair it?
421SuperDuty
Regular
- Location
- 中华人民共和国加拿大省
Come on, man. If i could buy two i'd buy a Tavor.
Murphy's law means it will at the worst possible moment
Last edited:
I got in contact with them a couple years ago.
They had 1 barrel for like $325 and one spring kit for like $180 or something.
I didn’t buy anything.
I’ve had thousands through them with minimal wear and no breakages, and haven’t heard of anything breaking.
I’d like spare parts... but it’s not much of an option. So yeah.. worst case.. find a cheap used one.
421SuperDuty
Regular
- Location
- 中华人民共和国加拿大省
Is there any talk of a Gen 4?
Doubt it. Gen 3 wasn’t too long ago, and what else would change?
onetwentyish
CGN Ultra frequent flyer
- Location
- East Central AB (AKA Northern Texas)
A usable safety and some mlok slots on the bottom of the polymer hg would be nice, I would also be thrilled to see a rock and lock x39 version using T81 mags.
Doubt that will happen.
And the rock and lock x39 would likely be another model altogether... I’d buy 2 lol.
2008reedges
Member
- Location
- Calgary, AB
Hi guys, I just got a new Type 97 Gen 3. When I was switching over the charging handle I turnt in the little screw that holds it a bit too much and it developed a small crack on the side, will this affect anything? Right now it seems fine.
it wont affect anything, but it will break over time
2008reedges
Member
- Location
- Calgary, AB
Shoot that’s not good, any way to alleviate it? I’m thinking some superglue or something in that area plus loctite on the screw as a fix.
BUBBA can fix anything the right way!!!
commissar_lubi
CGN Regular
Played around with sling setups with the MS3 Sling, ended up with this setup which works really well for shoulder transitions.
https://imgur.com/a/wBCxd0Z
https://imgur.com/a/wBCxd0Z
