Remington 700 factory detachable mag options?

[fightinghamster]

I’ve got a older Remington 700 in 30-06 with a hinged base magazine and I’d like to convert it to a detachable magazine, Is there a factory mag system I can use? Or is aftermarket my only options, I’d prefer metal and flush mount but I’m not picky
Any information is appreciated
( I’ve heard of kwik klip but I’ve never seen one for sale anywhere)

 

[Hitzy]

Lots of places have KK conversions, probably the cheapest and easiest way to get over to a mag.
https://www.eaglefirearms.ca/kwik-klip-remington-700-la-conversion-kit.html
Personally I'd keep the hinged setup for a hunting rifle, far more pro's then con's with a hinged floorplate vs mag.

 

[Bad Bob]

I do not know where you could get Kwik Klips today, but I can tell you that I have used several of them over the years and they have all fit great, easy to install and function perfectly.

 

[fightinghamster]

Lots of places have KK conversions, probably the cheapest and easiest way to get over to a mag.
https://www.eaglefirearms.ca/kwik-klip-remington-700-la-conversion-kit.html
Personally I'd keep the hinged setup for a hunting rifle, far more pro's then con's with a hinged floorplate vs mag.

The ability to slap the mag in quickly when I get off the bike makes it worth it to me

 

[remington jim]

There’s lots of options for a Mag conversion for a REM m700- GOOGLE search it ! RJ u

 

[Hitzy]

The ability to slap the mag in quickly when I get off the bike makes it worth it to me

Just wait until you lose it in the bush driving around on the bike lol.
It's a push feed, you need to jump off and take a shot, drop a round on the follower, load, fire.

 

[skidderman]

I have not tried it but suspect if you obtained a stock with factory mag you may be able to convert to factory that way. From my perspective kwik clip is the easiest and least expensive solution.

 

[remington jim]

I have not tried it but suspect if you obtained a stock with factory mag you may be able to convert to factory that way. From my perspective kwik clip is the easiest and least expensive solution.

Remington m700 with factory DBMagbis a different action and stock - RJ

Kwik Klip conversions are simple and work WELL ! I have several - RJ

 

[reb]

Kwik Klip is the way to go, easy to install, work great and easy to get replacement mags.

 

[SuperCub]

I’ve got a older Remington 700 in 30-06 with a hinged base magazine and I’d like to convert it to a detachable magazine, Is there a factory mag system I can use? Or is aftermarket my only options, I’d prefer metal and flush mount but I’m not picky
Any information is appreciated
( I’ve heard of kwik klip but I’ve never seen one for sale anywhere)

I have a Kwik Klip for a long action here I can part with. PM if interested.

 

[struff55]

All options other than a kk involve buying complete stock assembly’s no other options the msgs all lock into a latch attached to the the stock
Keep the floor plate a much better system

 

[DANS40X]

H S precision manufactures a DBM system that takes 5minutes to install in a 700 BDL stock.

 

[Mike Webb]

Remington m700 with factory DBMagbis a different action and stock - RJ

Kwik Klip conversions are simple and work WELL ! I have several - RJ

I put a 700 dbm stock on a standard 700 with hinged floorplate, works fine.

 

[stubblejumper]

Remington m700 with factory DBMagbis a different action and stock - RJ

Kwik Klip conversions are simple and work WELL ! I have several - RJ

The factory DM action has the feed rails removed, but the factory DM stock and floorplate will work fine with a standard BDL action. I had McMillan inlet a stock for the factory DM , and using the DM floorplate, I used my standard BDL action.

 

[Mike Webb]

Yes because the detachable mag is single column and doesn't need rails like the staggered rounds in a standard hinged floorplate 700.