Let me know if you discover a tang safety delete HH!!! Only need the half #### IMHO...
Lets get a some lever action #### going
- Thread starter TheManInBlack
- Start date
Let me know if you discover a tang safety delete HH!!! Only need the half #### IMHO...
fingers284
CGN Ultra frequent flyer
- Location
- Alberta Cowboy Ranges
On a Miroku, That tang safety is a breeze to get rid of, just remove it & fill the hole with a homemade blank or leave the hole open wont affect anything if open. A bank can be made in a few minutes with a grinder or Dremmel or even just a file...retain with screw that held the safety in place. The blank I built for mine has a hole D-T for a tang sight, just so happens the hole spacing on a Winchester tang base lines up with the blank.
My 86' (45-90)still has the rebound intact and I don't notice it being a problem at all
My 86' (45-90)still has the rebound intact and I don't notice it being a problem at all
Thanks, good info, if you tried the 86 without the rebound you would take yours out, no parts to buy, 15 minutes for assembly and disassembly and a second on the grinding wheel
Licensed to kill
CGN Regular
- Location
- Peace Country Alberta
Licensed to kill
CGN Regular
- Location
- Peace Country Alberta
Hmmmm, Thank you.
I will make you a short video of it in operation if you pm me your email addy
freddyfour
CGN Ultra frequent flyer
- Location
- Brant County, Ontario
Is there something out there for them or will this be a custom job?
That leather and wood / steal combo just scream awesomeness! Very nice
- Location
- NOVA SCOTIA, CANADA
I once seen a Ross 303 that had a lever attached on the right side.It worked well on the straight pull action.
I just did the whole nine yards.
Holy memory relapse.
Some gone, some clearly gone and some most definitely gone.
So maybe a btt is in order.
This gal came to me with the stock so sticky it was unnerving.
Took some serious payshints and there it is.
And a fabulous shooter too.
Holy memory relapse.
Some gone, some clearly gone and some most definitely gone.
So maybe a btt is in order.
This gal came to me with the stock so sticky it was unnerving.
Took some serious payshints and there it is.
And a fabulous shooter too.
freddyfour
CGN Ultra frequent flyer
- Location
- Brant County, Ontario
Beautiful rifle but that butt plate screams ouch!
No. The metal butt plate isn't an issue. In fact all of my levers (.357mag, .44mag, 45LC, and 45-70) have the metal on the end of the butt. The only time there's an issue is if the user takes too much ammo and decides to shoot it all.
And proper positioning of the rifle in the shoulder pocket is a key fundamental.
Some beauties here for sure! Since I dont know how to start my own thread (sorry) i'll ask here, I'm interested in buying a Rossi R92 in 357 or 44. Does anybody have any experience with them, pros/ cons, anything i should be aware of other than the plastic safety? the reviews on youtube seem pretty good, but I would like to hear from fellow nutz. Thanks!
