Probably from the guy who doesn't want the one that comes with theirs.
Newly approved NR SPC9 from B+T !!!
- Thread starter Wolverine .303
- Start date
Probably from the guy who doesn't want the one that comes with theirs.
MACH
Member
- Location
- Brantford Ontario
Wow, was just wondering how many years these were away! Any NR with B&T mag lowers coming?
Wolverine .303
Business Member Rep
Delayed Blow-Back
Not yet, THOON.....
Upper/Lower yes..... spare parts perhaps, but minimal on major components. Smaller consumables yes.
They can be ordered with the standard lower yes. Month or two before we see the first shipment.
Nope, right in line with B&T products..
They are also Non-restricted if that's your primary concern ?
YES, TP9 and SIG available.
Place your order for one then yes!
bfiles
CGN Ultra frequent flyer
- Location
- Training in Camp X
So to clarify, these will be here in a month or 2 in NR form and will be coming in with a BT mag and Glock mag lower at the same time?
Are the NR ones going to look like the internal suppressed version with faux suppressor or have the long skinny azz barrel like the NR apc9?
Are the NR ones going to look like the internal suppressed version with faux suppressor or have the long skinny azz barrel like the NR apc9?
Thunderhog
CGN Ultra frequent flyer
- Location
- East Kootneys
Yes we love levers!.....
But you are wrong on your second part of your statement.
I own several restricted firearms, I also have 12 (6) handguns.
I got them before the corrupt liberals went out of control and became a tyrannical government run by CHINA!......
My point is this, those guns are not worth $4000.00 plus to me. If others want to spend that kind of money, fill your boots.
But, why would one throw away money these days on restricted versions of firearms when the current government is going to take them.
Registration means confiscation, and yes this means my restricted and prohibited guns as well.
I know guys who have $100,000.00 and more in guns that are now paperweights courtesy of our corrupt government.
So again spending over $4000.00 on a gun you will not have very long is ridiculous. No offence meant to Wolverine Supplies.
In these days of tough economic times, how many people can throw away $4000.00?
mareshow
CGN Regular
- Location
- Edmonton, AB
what's required for the order deposit wise? I'm interested in a NR but would like to see a pic of one before I commit.
Wolverine .303
Business Member Rep
Wolverine .303
Business Member Rep
Having a hard time grasping the confusion here..... The main subject of this thread is the fact that it is available as an NR firearm, the short versions are available as well [ why wouldn't we offer them!? ]
And lots of folks are still purchasing firearms, Restricted or not. Why did 100,000+ people purchase handguns last year when they are registered ? Because they can.
bfiles
CGN Ultra frequent flyer
- Location
- Training in Camp X
Add 2.6" to this and there ya go....
:-/
Should see if BT can add a few inches to faux suppressor and barrel to this....
Something like this -
Last edited:
serg777
CGN Regular
- Location
- Vancouver, BC
Externally and I'm sure internally it is very similar to FX-9, especially when both accept Glock mags. Nothing much more to invent for the straight blowback. At least extra $3K should fix BHO which appears a chronical problem with FX-9. Love both of these, but I guess will stick to FX-9 for now.
gutinater
CGN frequent flyer
- Location
- Edmontonia
Do these have an aluminum or polymer lower?
bfiles
CGN Ultra frequent flyer
- Location
- Training in Camp X
They are polymer and the exact same lower as the APC/GHM9
SteelFlint
CGN frequent flyer
- Location
- BC
Lol obviously not you.
gutinater
CGN frequent flyer
- Location
- Edmontonia
Sweet thanks
It only took 1.5 years to get the NR approval but it is finally done! Shorty boi's and longer NR models will be available, get your order in today !! Details on the configurations below!
As always:
You can E-mail us at: sales@wolverinesupplies.com
You can Call us at: 204-748-2454
You can send at letter to: Box 729 , #1 River Valley Road, Virden, MB, R0M 2C0 , Canada
You can send a messenger to : Lattitude 49.89617 | Longitude -100.85384 NE ¼ 5-11-25
BT-500001-SPORT-G-CA [ RETAIL - $4535.00 ]
B&T semi-automatic carbine SPC9 SPORT G
- Cal. 9x19mm, barrel length 477mm, thread 1/2x28 [ 18.7" ]
- Aimpoint® Micro T1 with spacer, foldable emergency sight
- AR15/M4 style charging handle
- M4 type lower accepting Glock 9mm magazines
- retractable stock, 6 positions
- 1x magazine Glock 10 rounds
- cleaning kit, sling, case & manual
BT-500001-G [ RETAIL - $4200.00 ]
B&T semi-automatic carbine SPC9 G
- Cal. 9x19mm, barrel length 230mm [ 9" ]
- Aimpoint® Micro T1 with spacer, foldable emergency sight
- AR15/M4 style charging handle
- M4 type lower accepting Glock 9mm magazines
- retractable stock, 6 positions
- 3-Lug suppressor interface
- 1x magazine Glock 10 rounds
- cleaning kit, sling, case & manual
BT-500001-PDW-G [ RETAIL - $4535.00 ]
B&T semi-automatic carbine SPC9 PDW G
- Cal. 9x19mm, Barrel length 167mm [ 6.5" ]
- Aimpoint® Micro T1 with spacer, foldable emergency sight
- M4 style charging handle
- M4 type lower accepting Glock 9mm magazines
- Telescopic stock
- 3-Lug suppressor interface
- 1x magazine Glock 10 rounds
- cleaning kit, sling, case & manual
Use your imagination and add two inches to the end of it... [ not the first time you have done that is it? ]
For the NR version, can B&T do a bit longer handguard and faux suppressor instead of one very long handguard and barrel? I know it is probably a no, but worth to ask.
I didn’t get the NR GHM9 because of the super long handguard and barrel. They will look much better with a combination of proportional handguard and faux suppressor.
bossofthepine
New member
Is the lower removable on these like the GHM9? I have 2 extra glock lowers already.
