Dollar store tape measure

Probably cocks when activating the opening lever

no, cocking bit would be in the ballistics bag with the bayonet mount and the front pic. rail

About 20 min and a 180amp welder ,I could have that finished, red or green sight?
pointy thing to #### it, SKS bayo comes to mind, for the 3 rd guy.

I really hate these posts, at 3am I am going to be awake with dumbass ideas, I have enough of my own, some may even be legal.
 
Last edited:
bCzmmgo.jpg
 
I had the same thought, it seems as if there are some parts missing here. And I'm not sure how you could #### it by hand, the pins that push the strikers back take a lot of force.

Just turn it over is put the strikers in cocked position by pushing down in edge of bench
If in the field a pair of channel lock pliers work good
 
For safety reasons, it should have an Aliexpress folding foregrip. You don't want to shoot your fingers off.
Actually, with rifled slugs it would group well enough for geese, I'll wager.
 
Back
Top Bottom