All-New: Type 81M

[SikhArmory]

**Image and video linking functions will be enabled after you have contributed more to the forum**
**Image and video linking functions will be enabled after you have contributed more to the forum**

Does the stock look bent to you anyone. It seems bent to the right. I am left handed so when I down site it seems off unless i bring it in closer vs using right side and aiming down sight.

https://imgur.com/a/oXAzs8Y

 

[MapleShot]

They could just be talking about the fixed stock Type 81M's. Previous estimates were around 5,000 underfolders and 2,500 fixed stock.

This is what I want to get clarified... Even those numbers don't match. What are they talking about with those percentages? What are the baselines?

 

[NSS]

nm answered on listing*

 

[hunterhenderson]

**Image and video linking functions will be enabled after you have contributed more to the forum**
**Image and video linking functions will be enabled after you have contributed more to the forum**

Does the stock look bent to you anyone. It seems bent to the right. I am left handed so when I down site it seems off unless i bring it in closer vs using right side and aiming down sight.

https://imgur.com/a/oXAzs8Y

Dustin? Is that you

 

[hunterhenderson]

They could just be talking about the fixed stock Type 81M's. Previous estimates were around 5,000 underfolders and 2,500 fixed stock.

With the references to "pal" etc i believe you have been here before, what was your previous log on name?

 

[hunterhenderson]

They could just be talking about the fixed stock Type 81M's. Previous estimates were around 5,000 underfolders and 2,500 fixed stock.

Where are you from? welcome by the way

 

[misterplinker1]

Anyone else have their status with Canada Post as "Item Delayed". Im in the group that randomly got their packages routed through Winnipeg after no movement for a few days. I'm in ON and the waiting is starting to kill me haha

Same boat. Delayed. Sat in Calgary for awhile now in MB.

 

[DerWeißeWolf]

**Image and video linking functions will be enabled after you have contributed more to the forum**
**Image and video linking functions will be enabled after you have contributed more to the forum**

Does the stock look bent to you anyone. It seems bent to the right. I am left handed so when I down site it seems off unless i bring it in closer vs using right side and aiming down sight.

https://imgur.com/a/oXAzs8Y

Mine looks identical to yours. I havent measured it yet, but two meter sticks aligned with the receiver show an obvious bending to.the right.

 

[SikhArmory]

I will try that method shortly and see how it looks. Im 100% sure it had a right bend in the stock.

 

[SikhArmory]

Dustin? Is that you

Nope lol

 

[Outdoorslover01]

Received my under folder yesterday, but for some reason it has a lot of grease on the gun.

Any tips on how to degrease it ?

 

[JasonGTA]

Received my under folder yesterday, but for some reason it has a lot of grease on the gun.

Any tips on how to degrease it ?

They're oiled from factory to preserve the metal. Use rags or paper towels and some elbow grease and you'll be good to go in no time. Make sure the bore is clear of all oil and grease as well

 

[Wesley28]

I got a dud. the cleaning rod has to bend to fit properly! https://ibb.co/MhfVnfS

 

[JeffMan]

I got a dud. the cleaning rod has to bend to fit properly! https://ibb.co/MhfVnfS

Are you saying your cleaning rod is bent? Or is your barrel out of alignment?

 

[bfiles]

I got a dud. the cleaning rod has to bend to fit properly! https://ibb.co/MhfVnfS

They all bend to fit tight in their holder

 

[hunterhenderson]

I got a dud. the cleaning rod has to bend to fit properly! https://ibb.co/MhfVnfS

not uncommon, hows it shoot?

 

[hunterhenderson]

Nope lol

we will be watchin

 

[Wesley28]

not uncommon, hows it shoot?

I set the irons to 0 (after 4) which is the highest setting and the sight picture still won't come up high enough. I'm sure its a cheekweld issue though

 

[hunterhenderson]

After SA shipment both the specification was tightened and proceedures were set in place to measure and catch rifles with trunions placed out of specification. However the odd one does slip through, we have one confirmed case so for on M shipment, it is 0.5mm out of spec. Historically the T81 rifle has been 99.95% within specification.

The one metric that has been 100% is the rate of function. Despite selling in 5 figures numbers of rifles, we have not had a single rifle come back because it wasn't functioning properly. Even range guns going through 10's of thousands of rounds only need wear parts replaced on rare occasions, which we do under warranty.

Mine actually was sent back because without a magazine catch it could not function

 

[bfiles]

I set the irons to 0 (after 4) which is the highest setting and the sight picture still won't come up high enough. I'm sure its a cheekweld issue though

?!!??!? Either your front sight post is just adjusted to low or you aren't aiming properly also, out the rear sight to 1 and see