Lockhart renegade semi auto conversion

[Paul_1982]

As there have been well documented examples of both a lever action rifle and Lee Enfield bolt action rifles being converted to SA/FA action, your "logic" would open up the possibility of every gun in the country being banned.



Correct.

Who’s selling these lever action semi-auto rifles in Canada? Where would one be found?

 

[b-wingpilot]

Also, anyone can turn an MRA renegade into a semi-auto by just installing these parts, without any modification done to the receiver:

Barrel & Bolt
Magazine

 

[Bfranklin]

There is also no definition of variant in law either, it certainly hasn't slowed em down.

That's a feature, not a bug.

 

[Paul_1982]

Also, anyone can turn an MRA renegade into a semi-auto by just installing these parts, without any modification done to the receiver:

Barrel & Bolt
Magazine

How does it cycle?

 

[FilamentNFirearms]

How does it cycle?

I'm probably missing something, but the bolt in that link is a radial-delayed direct blowback system, so no gas tube, gas block, etc.

 

[b-wingpilot]

I'm probably missing something, but the bolt in that link is a radial-delayed direct blowback system, so no gas tube, gas block, etc.

Correct. Radial delayed, so no gas system (or receiver cuts to accommodate one) required. Hopefully someone does this, just to prove all the naysayers wrong.

 

[Victory Ridge Sportsman]

Correct. Radial delayed, so no gas system (or receiver cuts to accommodate one) required. Hopefully someone does this, just to prove all the naysayers wrong.

Our bolt carrier is a smaller diameter than an AR15 bolt carrier and there is no slot to receive the gas key on the CMMG carrier.

 

[themarauder]

Correct. Radial delayed, so no gas system (or receiver cuts to accommodate one) required. Hopefully someone does this, just to prove all the naysayers wrong.

I'm not going to say I haven't seen this done, but I'm not going to say I haven't. If you have access to a machine shop and the time and expertise, you could potentially convert many firearms into semi or FA. Or build guns from scratch. None of this is magic.

 

[Moe]

Also, anyone can turn an MRA renegade into a semi-auto by just installing these parts, without any modification done to the receiver:

Barrel & Bolt
Magazine

Isn't the inside diameter of the receiver slightly smaller than an AR?

Cheers
Moe

 

[b-wingpilot]

Our bolt carrier is a smaller diameter than an AR15 bolt carrier and there is no slot to receive the gas key on the CMMG carrier.

Couldn’t the bolt just be swapped, instead of the carrier?

 

[I Dont Care About You]

I'm not going to say I haven't seen this done, but I'm not going to say I haven't. If you have access to a machine shop and the time and expertise, you could potentially convert many firearms into semi or FA. Or build guns from scratch. None of this is magic.

With a bit of time on your hands you could convert your car into a machine gun.

Then of course today the 3D printer makes everything easier and more accessible to the common man. You can't disrupt the signal.

 

[Paul_1982]

I'm not going to say I haven't seen this done, but I'm not going to say I haven't. If you have access to a machine shop and the time and expertise, you could potentially convert many firearms into semi or FA. Or build guns from scratch. None of this is magic.

Which is exactly what Victory was saying. You have to machine the receiver into something new.

 

[mmattockx]

Couldn’t the bolt just be swapped, instead of the carrier?

I'm not certain the carrier is the same as a standard AR carrier on the CMMG delayed blowback system. If it is then swapping the bolt should work.

It should be very possible to turn down a standard blowback carrier/bolt assembly to work in the smaller receiver, as well.

You have to machine the receiver into something new.

Can you explain the legal standard that divides 'modification' and 'manufacturing'?


Mark

 

[Tokay444]

With a bit of time on your hands you could convert your car into a machine gun.

Then of course today the 3D printer makes everything easier and more accessible to the common man. You can't disrupt the signal.

You’d still have cucks asking for an FRT.

 

[Tokay444]

I'm not certain the carrier is the same as a standard AR carrier on the CMMG delayed blowback system. If it is then swapping the bolt should work.

It should be very possible to turn down a standard blowback carrier/bolt assembly to work in the smaller receiver, as well.


Can you explain the legal standard that divides 'modification' and 'manufacturing'?


Mark

No he can’t.

 

[tiriaq]

You’d still have cucks asking for an FRT.

The RCMP will create a FRT entry for the rifle - if they have not already done so. The goal of the Firearms Reference Table is to catalogue every firearm.
The FRT entry will include the classification of the converted rifle.

 

[Ex3dy]

Also, anyone can turn an MRA renegade into a semi-auto by just installing these parts, without any modification done to the receiver:

Barrel & Bolt
Magazine

I've been trying to keep a lid on this until a more favorable gov shows up, at least now you know why I've been calling for Glock and Colt bottom metal.
I would say the race is on now.

 

[Tokay444]

The RCMP will create a FRT entry for the rifle - if they have not already done so. The goal of the Firearms Reference Table is to catalogue every firearm.
The FRT entry will include the classification of the converted rifle.

You mean the converted car.

 

[Paul_1982]

I'm not certain the carrier is the same as a standard AR carrier on the CMMG delayed blowback system. If it is then swapping the bolt should work.

It should be very possible to turn down a standard blowback carrier/bolt assembly to work in the smaller receiver, as well.


Can you explain the legal standard that divides 'modification' and 'manufacturing'?


Mark

Even a modification will get a new FRT entry. Different barrel lengths and calibers have different FRT entries. The same rifle can have an FRT that’s non-restricted and a modified prohibited/restricted model based on barrel length or calibre.

 

[brownbear53]

I don't know how you can label it an AR variant. Then any piece of metal is an AR variant with enough machining. I don't thing the laws were written concerned about semi-auto conversions but I am no expert here.

My trucks lower control arms are an AR variant because they are made of the same aluminum alloy and I painted them black. xD