Cleaning cord jammed

[cooperod]

Use em all the time felt vfg pellets, then again the cable is metal

We have removed 2 cable ones at our shop, that the customer tried removing first and both barrels were no longer useable. The cable ones are much worse than the terrible Bore snake ones in my opinion.

 

[remington jim]

I will take it to Gunco....thanks for all your "helpful" input

Well how did it go at Gunco. did they Get ER done

 

[sdlonyer]

Well how did it go at Gunco. did they Get ER done

YES it took Jason about 2 minutes

 

[tiriaq]

We have removed 2 cable ones at our shop, that the customer tried removing first and both barrels were no longer useable. The cable ones are much worse than the terrible Bore snake ones in my opinion.

I can see that a stuck cable would be worse than a stuck cord.

 

[Joe Amorosi]

YES it took Jason about 2 minutes

How did he get it out?

 

[sdlonyer]

put the gun in a vise and pulled

 

[Snider shooter]

We have removed 2 cable ones at our shop, that the customer tried removing first and both barrels were no longer useable. The cable ones are much worse than the terrible Bore snake ones in my opinion.

I removed one for a fellow at the range. Two short cables screwed together and he knew the female end was stripped on one but kept using it. Took be about 10 minutes. I used my cable. Put it down the barrel and kept trying to screw them together. After some trial and error the two ends lined up and screwed together and I was able to pull it out.
Biggest problem is people using pull thru that are worn out and ready to break.

 

[remington jim]

YES it took Jason about 2 minutes

Excellent !

 

[boxhitch]

put the gun in a vise and pulled

what?! no drama ?!

 

[I Dont Care About You]

Biggest problem is people using pull thru ....

Fixed it for you.