Panzer M4 Speed Pro thread

It’s a pretty $hitty feature when it gets pressed accidentally while carrying and then you have a club if and when when you need the gun to work
That paddle rocks way to easy to cause that jam it should have been designed differently or a separate button should be used for the shell release
The jam is also a pain to clear which could be bad news in a bad situation
 
It’s a pretty $hitty feature when it gets pressed accidentally while carrying and then you have a club if and when when you need the gun to work
That paddle rocks way to easy to cause that jam it should have been designed differently or a separate button should be used for the shell release
The jam is also a pain to clear which could be bad news in a bad situation
You could probably custom "fix/tweek it to your specs with a dab of metal epoxy, or even easier a dab of quality silicone.

Or get an aftermarket part.
 
I got my panzer Speed-Pro last week and shot it for the first time on the weekend.
I shot a total of 50 x 1oz target slugs, had no issues at all with feeding or firing.
I was nervous about this purchase as people tend to knock the Turkish clones, but the price tag was too low to ignore, so I took the risk.
It was a ton of fun to shoot, and I would say to anyone that's nervous or sitting on the fence - Go for it - YOLO!
I have 2 peices of advice...

1. If you plan on using a red dot, like me, make sure you crank that baby down tight. The only issue I had was that the recoil loosened my red dot, which had me chasing zero before I realised what was going on.
2. If you don't like crowds of people asking about your shotgun, this isn't for you. People will 100% come over to stare at you when you shoot this thing fast!

I left the range with a smile on my face, and a sore shoulder. That's a good day in my book!
 
For those asking. Yes the Factory Benelli M4 full length Mag Tube fits the Panzer M4. You may have to clean some lock tight out of the threads. But they fit perfectly.

Also no more hand gaurd retainer ring. As it is machined into the Benelli Tube.
 
Last edited:
Panzerarms website sells the 7 shell tubes. 60 usd. Just got to get it over the border.
Is it hard to get parts shipped across the border? If so why? Its parts. Not a firearm.

I have a Panzer M4 7 round Tube on my Marine finish Panzer M4.

I put the Benelli 7-Round mag tube on my black Panzer M4 SPEED. As I found a Benelli 7-Round tube for $69. Only 10 dollars more. I much prefer the Benelli tube as it has the handguard retainer lug machined into the tube. So one solid piece. As opposed to a slide on washer style. If you cane find the Benelli tube for a reasonable price. It is definitely worth it.
 
Is it hard to get parts shipped across the border? If so why? Its parts. Not a firearm.

I have a Panzer M4 7 round Tube on my Marine finish Panzer M4.

I put the Benelli 7-Round mag tube on my black Panzer M4 SPEED. As I found a Benelli 7-Round tube for $69. Only 10 dollars more. I much prefer the Benelli tube as it has the handguard retainer lug machined into the tube. So one solid piece. As opposed to a slide on washer style. If you cane find the Benelli tube for a reasonable price. It is definitely worth it.
Where did you find the benelli for 69?
 
That would be prohibited. I found it on the site. And it’s 69.99 on the website.
Simple math says you didn’t pay 69 dollars for it. Unless you live stateside ?
Yes. What is it like with shipping gun parts to Canada?
 

Attachments

  • 20251101_205335(1).jpg
    20251101_205335(1).jpg
    281.9 KB · Views: 41
what's everyone's experience been with the initial cleaning. I found it challenging disassembling the barrel and trigger group. Reassembling the barrel was a challenge as well.

Does it improve once it's been broken in?
 
what's everyone's experience been with the initial cleaning. I found it challenging disassembling the barrel and trigger group. Reassembling the barrel was a challenge as well.

Does it improve once it's been broken in?
What part of disassembly/reassembly specifically do you mean? Putting the barrel back in the receiver, or the handguard onto the barrel, or the pistons onto the barrel, etc.
 
Back
Top Bottom