Troy Pump Action Rifle - .223 Rem., 16", BattleAx CQB Stock [SPMP-AR0-00BT-CA]

[bWONGER]

I'd like to know this too. Is it .223 only or a .223 Wylde chamber?

I asked Troy about this directly a few years back. They stamp them 223 since 223 is a "sporting round" and 5.56 is apparently too scary to import but all their barrels are chambered in and safe to fire 5.56 ammunition

 

[Dexter Morgan]

"I asked Troy about this directly a few years back. They stamp them 223 since 223 is a "sporting round" and 5.56 is apparently too scary to import but all their barrels are chambered in and safe to fire 5.56 ammunition"

This is the same policy for pretty much all manufacturers.

 

[greychalk]

I spoke with the importer this morning about folding stock guns. They are gonna see if they can get us an 18" gun with folding stock. The issue is the 16" goes below the OAL for NR.

Also they are going to be bringing in a 12.5" version with the same configuration as above.

any rough ETA on the 12.5 version?

 

[DanOnymus]

This is the same policy for pretty much all manufacturers.

Yet, when I contacted them about mine last spring, I was told it's .223 and using anything else voids the warranty.
Got a case of .223 for starters.

Side Note: I hope they provide the B5 stock as shown, not the "Battle Axe" stock in the title. I was told that their new models all come with the B5 now.

While their TROY Battle Axe stock offered a different look and some storage space, mine proved to have a defect in the adjustment knob, which would collapse when firing. In Troy's defense, they were great to deal with and sent a replacement B5 stock within days.

 

[GARY56]

I spoke with the importer this morning about folding stock guns. They are gonna see if they can get us an 18" gun with folding stock. The issue is the 16" goes below the OAL for NR.

Also they are going to be bringing in a 12.5" version with the same configuration as above.

Will there be a 12.5" inch in 300 Blackout?

 

[Monster Mike]

I had a couple, 1 in 5.56 and another in 300 Blackout. They look cool but i was getting light primer strikes on the 5.56 version. The 300 blackout had a 12.5" barrel and shortened pump and handguard and was ###y AF. I let it go to fund another project. Fun Fact: the barrel nut is on super strong so make sure you are using a barrel torque rod and just barrel soft jaws aren't good enough

 

[GARY56]

Sounds like a couple of lemons.

I know earlier versions had issues with the pump rod

I have the 16" 5.56 converted to 10.5" by ATRS - been 100% reliable.