Rossi Rio Bravo

Canuck44

CGN Ultra frequent flyer
Rating - 100%
42   0   0
Location
Terrace, B.C.
I recently bought a Rossi Rio Bravo .22LR. This gun defines fun. I have about 300 trouble free rounds thru the gun. I put a cheap little red dot on it and the gun and the red dot seem to love each other.

Now I'm 81, old eyes aided by a stigmatism, are not a recipe for accuracy, never the less I have no problem hitting a gopher sized steel target at 50 yards with the gun (rested off a bench). Did I say I am no rifleman. Well off the bags the gun is capable. The trigger pull is not about to put an Olympic Free Pistol to shame but it has a decent plinker trigger pull leaning to the heavy side. Build quality is what you expect for a gun that cost me just under $500 -great service. thanks Tenda. Wood to metal fit is better than some I have seen. Not Uberti fit though. The lever is smooth as silk. Ejection puts all cases in a neat pile. When you lever the case out don't be gentle, going slow will cause the empty case to slip off the extractor and well, sometimes the case falls out and if you are really dumb you can jam the gun up quite good....don't ask!

Now if you are fed up with Trump and would prefer to ignore the US, take a look at this little Brazillion Rossi Rio Bravo. This gun is designed for the John Wayne in all of us.

For those who are concerned about accuracy a word to the wise. Bulk .22LR, any brand is not found in the hands of serious .22LR target killers. Shooting off a gun sled the cheap stuff may get you 3/4" groups at best from my Anshutz (sp) using a scope. If you are an average hunter type who likes to shoot Grouse off fence posts at 15 yards, grew up in Alberta, this little gun will do the job rested on a tree, tire or standing. If you think you are going to do consistent head shots it at 50 yards with iron sights well you are a way better shot than I see at our range and using something better than bulk ammo. Just saying.

I didn't buy this gun to shoot paper at 50 yards but breaking rocks at 50 yards on our Pit 1 is just fun and 6 inch rocks, while standing, don't have a chance. Rolling tin cans down range in Range 5 with Paul H or Ted R is just plain fun. Speed Shooting steel plates at 10 - 15 yards is cool if you still have some kid in ya and can remember playing war, as a kid, at the Edmonton Municipal Airfield in the 2nd bush. Barry, George, JC, and Brian ya still on the right side of the grass.

Take Care

Bob
Elbows Up
ps I should point out we used branches cut from poplar trees for rifles, pistols, machine guns and rocks for grenades.

pps I'll post some pics tomorrow
 
Thanks for the tip. Do you have any idea what screw it takes? It almost looks like a scrub nut would work. That said if I were to screw it to far past the threads I would have another issue. If you don't know I'll chase down the info via Rossie, USA. I may put a Bushnell 1x5 scope on the gun. The red dot is fine for plinking but for added accuracy a scope is the ticket. More later.
Adjustable ... Note the little hole in the backstrap underside. Fnd a matching screw, insert, tighten until it meets your preference.


Take Care

Bob
 
I got hold of Rossi USA. The part is called a Receiver Cover Screw. The thread is M4 Metric for those who are interested. In order to get it I have to send on a warranty claim
Gavel Agency then sends a claim to Rossi USA who intern will send the part to Gavel. Gavel has been very helpfull as was Rossi. I am going to see if i can find the screw or a screw with this thread size.
Take Care
Bob
 
Yes, any M4 x 6mm should do, round head preferable.
I tried a red dot for rapid action, but wasn't able to cowboy spam satisfactorily. Almost.
So I added a scope on low dovetail rings, removed the factory sights, and slowed everything down a little. Sweet.
 
"Note the little hole in the backstrap underside. Find a matching screw, insert, tighten until it meets your preference.:

Thanks for the tip. Do you have any idea what screw it takes? It almost looks like a scrub nut would work. That said if I were to screw it to far past the threads I would have another issue. If you don't know I'll chase down the info via Rossie, USA. I may put a Bushnell 1x5 scope on the gun. The red dot is fine for plinking but for added accuracy a scope is the ticket. More later.

Amazon will have the bolt in my hand Monday. M4 6mm. I used a longer bolt to see the difference and your suggestion is spot on. What exactly does the bolt push on to lighten the pull?

Take Care

Bob
 
Yes, any M4 x 6mm should do, round head preferable.
I tried a red dot for rapid action, but wasn't able to cowboy spam satisfactorily. Almost.
So I added a scope on low dovetail rings, removed the factory sights, and slowed everything down a little. Sweet.
Joe I tried 6MM and there was no change in trigger pull. I have ordered M4 8MM. I had some 12 just to try and with a turn, once I felt resistance I noticed a significant improvement. Do you know what the screw is hitting. I assume a spring but it is difficult to tell from schematic drawings. With a scope this little gun is a tack driver. Quite impressed. Now if I only could shoot. Not as steady I once was or thought I was.lol

Take Care
Bob
 
Do you know what the screw is hitting
Pushes up into the hammer spring if I remember right. Don't go too far!
Taking off the stock to have a look at the spring in the backstrap is easy enough (if you are curious).
You might see why 6mm vs 8mm could vary between rifle (e.g. spring coil offset)?
Enjoy!
 
I'll check out the gun and spring layout by taking off the stock. With my propensity to break things I want to be careful. Bulls in China shops and I have a lot in common.

Take Care
Elbows Up
 
I recently bought a Rossi Rio Bravo .22LR. This gun defines fun. I have about 300 trouble free rounds thru the gun. I put a cheap little red dot on it and the gun and the red dot seem to love each other.

Now I'm 81, old eyes aided by a stigmatism, are not a recipe for accuracy, never the less I have no problem hitting a gopher sized steel target at 50 yards with the gun (rested off a bench). Did I say I am no rifleman. Well off the bags the gun is capable. The trigger pull is not about to put an Olympic Free Pistol to shame but it has a decent plinker trigger pull leaning to the heavy side. Build quality is what you expect for a gun that cost me just under $500 -great service. thanks Tenda. Wood to metal fit is better than some I have seen. Not Uberti fit though. The lever is smooth as silk. Ejection puts all cases in a neat pile. When you lever the case out don't be gentle, going slow will cause the empty case to slip off the extractor and well, sometimes the case falls out and if you are really dumb you can jam the gun up quite good....don't ask!

Now if you are fed up with Trump and would prefer to ignore the US, take a look at this little Brazillion Rossi Rio Bravo. This gun is designed for the John Wayne in all of us.

For those who are concerned about accuracy a word to the wise. Bulk .22LR, any brand is not found in the hands of serious .22LR target killers. Shooting off a gun sled the cheap stuff may get you 3/4" groups at best from my Anshutz (sp) using a scope. If you are an average hunter type who likes to shoot Grouse off fence posts at 15 yards, grew up in Alberta, this little gun will do the job rested on a tree, tire or standing. If you think you are going to do consistent head shots it at 50 yards with iron sights well you are a way better shot than I see at our range and using something better than bulk ammo. Just saying.

I didn't buy this gun to shoot paper at 50 yards but breaking rocks at 50 yards on our Pit 1 is just fun and 6 inch rocks, while standing, don't have a chance. Rolling tin cans down range in Range 5 with Paul H or Ted R is just plain fun. Speed Shooting steel plates at 10 - 15 yards is cool if you still have some kid in ya and can remember playing war, as a kid, at the Edmonton Municipal Airfield in the 2nd bush. Barry, George, JC, and Brian ya still on the right side of the grass.

Take Care

Bob
Elbows Up
ps I should point out we used branches cut from poplar trees for rifles, pistols, machine guns and rocks for grenades.

pps I'll post some pics tomorrow
Maybe worry about that elbows up idiot running our country.
 
Right now he is better than Polieve on the economy. He will find away to get out of waisting more of our money on the stupid gun law crap Trudeau keft him. He will lose one seat in his cabinet over the delay. Time will tell, he at least spending more money on the military and has amended the foreign worker program. Im up to my ears wirh Tim Horton's. I assume the boycot has worked given rheir recent hiring annoucement.
Carney will do better against Trump and right now that is more important than the gun file for both parties. It should be more important for all if us.

Take Care
Bob
 
Back
Top Bottom