I think that is why I like kipplauf or faking blocks rifles, you can still have a 22-24” barrel while keeping the overall length short and compact!
The 376 Steyr I mentioned above having the Wenig pepper laminated mannlicher stock has a 21" barrel. Handles nicely.I like 21-22" barrels; seems a reasonable compromise between performance and handling, and it's aesthetically pleasing as well. I would only go below 20" if it were a full length mannlicher style stock.
I had a Ruger RSI for a time, and still wish I had it at times. It was a nice, light, easy handling rifle, but it had some bark, and a fireball from the muzzle that you could see in bright sunshine.
For circa 10 years, I hunted deer in Saskatchewan with Ruger 1A in 7x57 - sold that rifle - last I heard it was still getting deer in coulees in Southern Sk. I would agree - it was very nice handling. Ended up various scopes at different times - I think I last used it with Leupold M8-6X scope on it (maybe M8-4X), a rear offset ring - I loaded 150 grain Partitions for it - it fired many hundreds of those.Agreed. A Ruger No.1A with a 22" barrel handles really well.
use a long action to give you more options if you want to use a 225 or 250gr. if you are limiting yourself to 200gr or smaller then just get a .30-06Good day all, as some of you know I’m looking into building a short action 338 federal for a “truck” gun. And one of a possible donner gun could be a Remington model 7 and they seem to comme more often than not with 18.5” barrel. My original plan was a 20” barrel… I know 1 1/2” difference don’t make a difference that said going from 24 to 22 at 22 you still have quite a bit of velocity to start with from 22 to 20 well there is a bit of compromise on usable distances to achieve proper terminal velocity/energy. Then you go down to 18.5 do I still have a 300 yard moose and bear gun?
I think in those mod 7 max coal is like 2.85”
I would like to shoot 200gn bullets, so I assume will possibly take over some of the powder capacity?!?!
At 18.5” it would definitely make for a true truck gun!!
I already have 3 30-06’s….use a long action to give you more options if you want to use a 225 or 250gr. if you are limiting yourself to 200gr or smaller then just get a .30-06
like the Henry H15 single shot? Just saw one at the range, not too bad a looking unit, about 36"?I think that is why I like kipplauf or falling blocks rifles, you can still have a 22-24” barrel while keeping the overall length short and compact!
I have a Merkel k5 in 30-06 and use to have a few Ruger no1 they are short handy rifles!like the Henry H15 single shot? Just saw one at the range, not too bad a looking unit, about 36"?
Interesting you mention a single shot…like the Henry H15 single shot?
the mannlicher was a great laminated stock alas for rh only ...X2 on that one. I even contacted the Custom Shop way back in the day to see if I could get one.
Came back "NO!".![]()
tikka you will thank me.I really want a short action rig. I’m ready to settle on a hinged floor plate magazine cause it seams easier to find than a box mag…
I’m debating Remington model seven or an howa 1500…
I want a short action for that one!tikka you will thank me.



























