Is there a need for more Cdn made AR parts?

Guys rather than answering a ton of emails I thought I would post this response to the most recent inquiry.

For logistical reasons we are doing the run in steps, all 50 have been machined on 1 side, about 1/2 of them are already machined on the 2nd side, once all are done on side 2 we start to cut magwells and such, then they all go into detail which is removing any tool marks and making sure the finish is up to our standard.
Once they pass QC then all get assembled with a LPK and tested for fuction, once that is done they get stripped serial number and any additional engraving is done.
Then into the anodizer.
Once back from anodizing, one more check for QC to ensure pins and such all fit properly, after ano and then the transfers begin follwed by shipping as soon as the CFC acknowledges the approval.
Given the production time/rate we are hoping to start shipping later this month
Cheers
Rick
 
A few more teaser photos

Pics084.jpg


Pics085.jpg



And a new brake that is truly awesome for eliminating muzzle jump.
Pics083.jpg

Pics082.jpg
 
FYI FDE Annodizing is not going to happen on that type of Aluminum.

We tried - and tried and tried. It is the reason we KG GunKote the SASS FDE
The scope from Leupy is a little goldish, same when you look at the ACOG's from Trijicon.


I would recommend annodizing in Black - and then spray-bake a coating on for other colors.
 
we need a good source of Mil-spec buffer tubes!!

and Rick that looks awesome!!!How much for the Brake?? how is the muzzle flash out of a 10.5" barrel?
 
Guys I need your help.
We are getting very close to done.
Those of you that have ordered lowers please send me an email with the following info.
Full name, address includeing postal code, phone number, RPAL# and the club you belong to, so I can start to get all the registration transfers done.:D
 
email sent with info...

can you also add to my wish list for your next batch of quad rails that I want a full length one in red :)

and hell if your goign to make uppers do one of those in red for me too :)
 
Email sent.
Also an inquiry into the cost of having a complete lower.

By the way I really like that trigger guard over the regular. It looks great.

Hey Wes, you putting together a rainbow coloured AR or something (not that there's anything wrong with that)?
 
Last edited:
Epoxy7 said:
Email sent.
Also an inquiry into the cost of having a complete lower.

By the way I really like that trigger guard over the regular. It looks great.
Click to expand...

I just cleared a shipment of DPMS LPKs and other parts today so we should be able to offer completed lowers very soon, probably before the lowers are ready to ship. Let me know if that is an option you want to explore.
Stocks right now are a bit scarce depending on what you are wanting.
 
You must log in or register to reply here.
Back
Top Bottom