Stock liner screw removal

M

maritimer

CGN Regular
Rating - 100%
71   0   0
Location
GTA, Ontario
I'm trying to remove the stock liner screw from my norc M14 stock, without the proper tool of course. What ingenious tools have people developed to do this? I figured a hammer and punch would work but that would no doubt mar the screw head.

Many thanks.
 
I used something like a key one gets with those cheap plastic trigger locks. Didn't work for long.

It would be easy to drill two holes in a piece of bar or rod the same spacing of on the screw head and insert a appropriately sized drill bit or rod.

Or - you could make something that looks like an Enfield firing pin removal tool out of a piece of hollow steel tubing with two opposite opposed notches cut the same diameter as the screw head holes.
 
maritimer said:
I'm trying to remove the stock liner screw from my norc M14 stock, without the proper tool of course. What ingenious tools have people developed to do this? I figured a hammer and punch would work but that would no doubt mar the screw head.

Many thanks.
Click to expand...

Grinder and Dremel + 1/2" drill chuck Key + 20 minutes = perfect tool for stock liner screw.

Total cost: $2.39 for chuck key.
 
Old socket, dremel with cutting disk, allen key to cut up for the dowels and a mig to tack it together.

IMG_2564.jpg
 
You must log in or register to reply here.
Back
Top Bottom