NEA Cantilever mount - shipping to dealers this month
- Thread starter Charles Martel
- Start date
PerversPépère
CGN Ultra frequent flyer
- Location
- Shawinigan (Quebec)
Could you apply a nice radius on the lower part of that cantilevered rail?
I tend to like parts that do not look like saber blades at the finished stage and, besides, it will add to the part looks.
Well done, by the way! Do you project black anodization or baked-enamel?
PP.
I tend to like parts that do not look like saber blades at the finished stage and, besides, it will add to the part looks.
Well done, by the way! Do you project black anodization or baked-enamel?
PP.
This is just a first off so it was not sent for plating. The final product will be type III anodized.
As for the rad, the change had already been made
jcoulson64
CGN Regular
- Location
- Somewhere in the Western Colonies
Two questions;
1, Have you scoped yourself with that setup yet?
2, Will this fit cantilevered rearwards off of a front rail?
1, Have you scoped yourself with that setup yet?
2, Will this fit cantilevered rearwards off of a front rail?
1 - there is a half inch, the ADM mount im using is high and its almost perfect. Lowering the cant mount will make it to low
2 - the actual scope mount is an ADM quick release mount
3 - As many as you would like.
It lower then most of the side mount units, keep in mind my mount is high and can be swapped out for a low mount. look how high this mount is - http://img214.imageshack.us/i/img2998y.jpg/ , now consider that our system is working off an inline stock. Not to mention look how far back the scope is mounted............ to each his own i guess.
ahhhhhh, i just finished watching clash of the titans and feel it may have caused me to drop a few iq point.
No i have not whacked myself with the scope, and the scope can still be moved further ahead on the rail another 2".
That is also being done. to the end of the dust cover
jcoulson64
CGN Regular
- Location
- Somewhere in the Western Colonies
Hehe, scope just looks way back is all. Guess it's not like there's much recoil to worry about though.
Out of curiosity, to mount off of one of your gen3 uppers, would you have to pull off the default rear iron sight or would it slip over? Additionally, any chance of pics?
It will slip right over, i will post pics later todayHehe, scope just looks way back is all. Guess it's not like there's much recoil to worry about though.
Out of curiosity, to mount off of one of your gen3 uppers, would you have to pull off the default rear iron sight or would it slip over? Additionally, any chance of pics?
Whats being shipped to dealers in three weeks time
The Cantilever mount.
