Before buying any parts/accesories to improve accuracy do the following:
- Give barrel a good cleaning
- Check the gas system/cylinder for play/movement and proper cylinder lock indexing
- Check to see how tight the trigger locks up into the stock
- properly lube the rifle
if everything looks good at this point, try different ammunition.........
You may have to do some tweaking on the rifle to get it to where you want.
The most common issue is a loose gas cylinder assembly..........easy to fix this.........the proceedure is listed in the "stickies" at the top of the forum.
Also get rid of the cheap softwood Chinese stock. many shooters report accuracy improving by simple switching to an aftermarket M14/M1A stock.........best bet is to pick up a surplus USGI fiberglass stock.........
Make sure the hand guard is not contacting the sidea of the stock in any way.........
Most common Mods are replacing the factory op rod guide with a National Match Spec Guide, and replacing the op rod spring with a USGI spring...........
To go any further will cost more money.........you will want to look at head spacing/bolt fitment........glass bedding the stock/action.........re-barrelling to a match spec barrel..........
I love M14s, but they can be an expensive pain in the A$$ to make shoot accurately............
