What groups might a Rem 760 achieve?

[JamesM]

Leave poor old Ben alone, he's gotten confused again. Also like all pump guns they like to be run hard and as you get older you loose upper body strength.

 

[JasonS]

as in function 5 times in a row? I haven't known a 760 or 7600 to be anything other than very reliable.
It's auto-loading jam-a-matic cousin though, that's a serious pile of crap.

x 2

 

[niftyfifty]

Sorry, but 760's shoot better than many bolts I've tried. I have to say that you don't know what you're talking about.

I'll ignore 16
I'm sorry you just don't see pumps at competition. You see primarily turn bolts for a reason. They allow consistency which is largely had by neck only sizing.

BTW poster of #16,you get all 4 moose?

 

[warrenb]

A good pump may equal the worlds worst bolt at best

I hope there are no impressionable children reading this. They may well think there is some basis to that ludicrous statement.

I'll ignore 16
I'm sorry you just don't see pumps at competition. You see primarily turn bolts for a reason. They allow consistency which is largely had by neck only sizing.

BTW poster of #16,you get all 4 moose?

Of course you don't. Pumps are never going to compete with bolts. Out of the box accuracy is another thing entirely. And people who think all pumps shoot 2 MOA groups at best havent tried many. Or seen many shot.

 

[niftyfifty]

Sorry, but 760's shoot better than many bolts I've tried. I have to say that you don't know what you're talking about.

You had best maybe spend more than 5 bucks on a bolt my friend. Show me one 1000 yrd comp held by anything other than a bolt. There is a reason for that

 

[warrenb]

And just to make a point. I only have this old target online. But heres my 7600 308. 9 shots at 100 yards. Cheap Winchester 150 grain PP bullets.

And yes the nineth shot did make it 2MOA.

 

[niftyfifty]

I hope there are no impressionable children reading this. They may well think there is some basis to that ludicrous statement.



Of course you don't. Pumps are never going to compete with bolts. Out of the box accuracy is another thing entirely. And people who think all pumps shoot 2 MOA groups at best havent tried many. Or seen many shot.

Your co arguer above would disagree that pumps dont out shoot bolts. And I must apologize for saying"the worst bolt" I have to take into consideration what some people purchase for bolts

 

[niftyfifty]

And just to make a point. I only have this old target online. But heres my 7600 308. 9 shots at 100 yards. Cheap Winchester 150 grain PP bullets.

And yes the nineth shot did make it 2MOA.

I guess it's a matter of personal preference. I wouldn't take that gun to the bush. I'll correct that before the ambush. Was that with or w/out glass and was there a 30 kph wind?

 

[warrenb]

I guess it's a matter of personal preference. I wouldn't take that gun to the bush. I'll correct that before the ambush. Was that with or w/out glass and was there a 30 kph wind?

Oh man that is mean. Lucky I got broad shoulders.

 

[captonion]

I'll ignore 16
I'm sorry you just don't see pumps at competition. You see primarily turn bolts for a reason. They allow consistency which is largely had by neck only sizing.

BTW poster of #16,you get all 4 moose?

Looks like Blindside/Laughingfool (AKA.Doug Laframbroise)is back again.Whats this, his fourth run at being banned?

 

[niftyfifty]

Oh man that is mean. Lucky I got broad shoulders.

Look on the positive. If you can do that with a rem water pump think of what you could do with a proper bolt

 

[niftyfifty]

Fist off, repeating slug guns have dismal accuracy......NOW THIS.

Someone needs a dunce hat.

That's not mean but the above is and reported

Make that two counts on the name calling

 

[captonion]

That's not mean but the above is and reported

Make that two counts on the name calling

Thought you were going to ignore me Nifty, or is that Blindside, or maybe Laughingfool, or do you just want to use Doug????????????????

 

[niftyfifty]

Thought you were going to ignore me Nifty, or is that Blindside, or maybe Laughingfool, or do you just want to use Doug????????????????

This should be fun. Where are your four moose and what are you going on about? This answer should be just chalked full of sanity. Oh come on, give us at least one pic of all the moose from the other thread .PLEASE!!!!That must account for the gun sale, to pay for the high priced, non producing hunt. Or was that hunt in your imaginary world?

 

[warrenb]

I have a 7600 in 25-06, and another in 260 Rem that I have grouping right around an inch(+/-) @ a 100.

Where did you get those chamberings? I have often thought I'd like one in .260.

 

[niftyfifty]

Where did you get those chamberings? I have often thought I'd like one in .260.

Be careful. That might be from his pretend world too

 

[captonion]

Where did you get those chamberings? I have often thought I'd like one in .260.

They come from Grice Wholesale in Pennsylvania. They have a special run as wee speak of 25-06, and 7mm-08. If you keep an eye on Grice,they will have a run of .260s. Mine shoots every bit as good as a bolt.

 

[warrenb]

I often look at the Grice special runs. How do you get them here. Could you give me an idea of the import costs to get one, if you don't mind?

cheers.

 

[captonion]

Here is one of my best groups with my 7600 in 25-06 from early this spring, shooting 120gr Sierra HPBT backed by Hodgdon H4831SC @ 2920 fps. Not bad for a pump gun.

 

[niftyfifty]

Here is one of my best groups with my 7600 in 25-06 from early this spring, shooting 120gr Sierra HPBT backed by Hodgdon H4831SC @ 2920 fps. Not bad for a pump gun.

Best group for pump. Any day of the week for decent bolt