Remington Elliot in 32 RF Anyone got one up here?

dingus

dingus

CGN Ultra frequent flyer
Rating - 98.9%
363   4   0
Location
B.C
I always wanted one of theses Remy Elliot 32 Rf 4 barrel pistols.
i just bought one simlar to the one in the picture below.
With all the guys shooting 32 Rf on CGN i wonder how many others have one?

I never see them in our EE for sale,
I got mine in the USA its a very tight gun with sharp rifleing and sharp barrel address fireing pin rotates gun was hardly used.
Looking forward to getting it as i have a few boxes of ammo long and short 32 Rf i asume they take the short 32 Rf ammo ?


zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzremyelliot.jpg
 
I have 2 of them ones not working the trigger was broken i tried to make a new one but the tolerances are really hard to get right. i see a lot of them for sale with no firing pins but there about the only part thats easy to make.

You may want to print these instructions off.(just don't ever take it apart)
http://www.remingtonsociety.com/forums/viewtopic.php?f=2&t=2880

The 32 longs chamber in mine but I've only shot the shorts
 
rgbai said:
I have 2 of them ones not working the trigger was broken i tried to make a new one but the tolerances are really hard to get right. i see a lot of them for sale with no firing pins but there about the only part thats easy to make.

You may want to print these instructions off.(just don't ever take it apart)
http://www.remingtonsociety.com/forums/viewtopic.php?f=2&t=2880

The 32 longs chamber in mine but I've only shot the shorts
Click to expand...

Thanks for that Link thats great! The one im getting looks hardly used so i hope i dont need to take it apart.
I havbe a full box of 32 Rf shorts and one box of Longs so i hope mine takes both.
They have always intrested me but i figgered better to get one in ex condition as i figgered they would not be fun guns to fix.

I will post better pics once i get the gun. That one in my frist post is not the gun just one thats for sale on GB
 
There a fun gun to shoot to #### the gun you push the trigger forward to uncock it you turn it upside down and push the trigger forward again.
i have a 12-6 license so I'd like to get the 5 shot .22 elliot next.
 
rgbai said:
There a fun gun to shoot to #### the gun you push the trigger forward to uncock it you turn it upside down and push the trigger forward again.
i have a 12-6 license so I'd like to get the 5 shot .22 elliot next.
Click to expand...

Yes i like the 22 ones to!

Im hopeing i dont need any parts Ever be nice to pick up another cheeper 32rf one in need of TLC for spare parts tho.

So they are DA only how well do they aim shooting DA?
 
Last edited:
There not real accurate because the sights are in the middle of the gun and
not on the top of the barrel. you have 2 barrels on ether side of the sights
so you can't really aim it.
 
Good job Dingus...Ive always wanted one too. I do like the look of the 5 barrel .22's better but of course that 12.6 thing screws that up :rolleyes:

My big thing is that I can't justify paying that much for a 32 rimfire that has no accuracy. They're still damn neat little guns though. I'll find a fixer uper some day and go at it.

I'll dig into my Elliot files and see if I can get some info for ya.
 
Ok, I took a look at my info...

Looks like you've got the later "B" model. There were two versions of the 4 barrels. The earlier models were a bit shorter where the frame cradles the lower barrels (almost 1/4" shorter) The later models were built a bit stronger with the heavier and taller cradle and most had the letter B stamped on the left side either behind or just above the left grip. Is yours marked with the "B"?
 
I got the 32 Rf Remy Elliot today and i must admit its fantastic! what a well built gun and yes Sportee its got a B stamped in it.

Theses are so safe you can carry it loaded and to #### it push the ring all the way forward and you then pull back and theres a sweet spot just before it fires so you can hold aim and fire. its a great little pocket gun. just turn upside down to uncock it like rgbai said..

I like it more than any other 32 Rf and it takes the 32 Longs Thats close to being equal to a standard 22 LR in power. :cool:
It fits in my big hands great.

Couple questions tho is the trigger the ring supose to come back with spring tention on its own?
Mine kinda just flops back and forth which is ok but it feels like a trigger return spring would improve it.
Also i like that you can #### it fast then just turn it upside down and its uncocked.
being DA very safe. great gun for the wife :p

Mines in Ex shape with sharp rifleing ex bores the fireing pin turns each time its cocked. i can see me buying more of theses.
As tony the tiger used to say THERE GREAT ! :D
 
Couple questions tho is the trigger the ring supose to come back with spring tention on its own?
Mine kinda just flops back and forth which is ok but it feels like a trigger return spring would improve it.

Thats how mine is also it just flops around.
 
rgbai said:
Couple questions tho is the trigger the ring supose to come back with spring tention on its own?
Mine kinda just flops back and forth which is ok but it feels like a trigger return spring would improve it.

Thats how mine is also it just flops around.
Click to expand...

Thanks! im used to it now.
I found my front hinge screw was abit loose as soon as i tightened it abit the gun shuts tight as new now.
I dont think this one was shot much at all.
Its my favorite derringer now.
To make a gun like this today would cost a fortune to think they made something so complicated in the 1860s if made today they would cost more than the antique ones sell for in the USA.
so many small parts all hardened. anyway im a fan will be watching for more of theses ;)
 
You must log in or register to reply here.
Back
Top Bottom