kickassnikov47
Regular
ahhhh now gentlemen i own, and have shot mainy ak's! i also have shot the real ak's when i was in the army, and was deployed to afghanistan, and let me assure you they are very sweet rifles!
the ak's i own are an arsenal inc rpk with milled reciever( running the action is allmost like ### because its the smoothest action ive ever felt in an ak)
2 mak-90's that i debanned after the ### ass 94 crime bill finaly sunset! but i still had to use section .922r parts in them to remain legal!
1 norinco nhm-91 that i gave the rpk treatment to, and is a bad ass rifle
1 norinco 84s sidefolder that i bought long before the ban, so its al original, but mags are both exspensive, and dmaned near impossible to find! (hate proprietairy mags)
2 sar-1's one in regular comblock configuration, one i refinished the stock set green( is pictured in the red rifles forum on a link) and installed night sights!
1 sar-3 that i have redone with a magnolia state armory ar-15 mag adapter, and a brugger&thommett rail system(this fricking thing is awsome but cost more than the damned rifle!) aimpoint ml2, 4x magnifier, surefire tactical light with ir filters, sure fire green lazer, and mako vertical foregrip and a el-cheapo nightowl optics 2nd gen night scope yeah its one of my fun guns lol!!!
1 century arms bulgarian ak-74 thats just stock, with 9 30 round mags, plum colored furniture, sling, and bayonet (fun, accurate, cheaper to shoot right now than 47, a bit more range, and accuracy than 47, but not as hard hitting)
i saiga that i am currently doing a conversion on to put it back into military specs! just so i can say i actualy have a russian ak lol!!!!
now having fired alot fo ak's semi auto ones here in the states sometimes have whats reffered to as trigger slap! trigger slap is when you fire the rifle, and the trigger resets, and when it does sometimes it can have a painfull slaping feel to your trigger finger! this is caused by crappy machined triger group castings, that are not machined to the exact tolerances, and dimmensions of the original comblock parts! but with a little bit of hand fitting of the parts, can be made smoothe again!
some of the ak rifles i have use slant muzzle breaks, witch are used to keep the rifle more level and controlable under rapid fire(in theory at least) this slant is supposed to direct gasses exiting the muzzle up and to the right, and by doing so push the rifle down and to the left (once again that is the theory)
they are very light, very tough, and mine at least are quite accurate, and they require very little in the means of care, all the poor little things want is ammo, love, and something to blow to peices lol!!!!
i also have a few ak rifle kits that i put away along long time ago, and have a few reciever flats with rails, that some day when i have the time, i will assemble into working rifles!!!! there are 4 of them, and they are all from romanian G type rifles, and have pristine bores, and all matching numbers! i got these back when the kits where $65.00 at centerfire systems!!! wish i had bought more i could sell them now for about $400 each lol!!!!
will post pics soon of my ak's just so you can all drool, and ohhh and ahh!!!!
but if you guys want your own, its not to hard, just come on down here to america, get your citizenship, and enjoy bettter rights lol!!!!
and your all welcome here, because we sure could use more gun owners to help us vote, and most canadians speak english, and actualy have better job skills than the current flood of mexican trash thats flowing into my country!!!
the ak's i own are an arsenal inc rpk with milled reciever( running the action is allmost like ### because its the smoothest action ive ever felt in an ak)
2 mak-90's that i debanned after the ### ass 94 crime bill finaly sunset! but i still had to use section .922r parts in them to remain legal!
1 norinco nhm-91 that i gave the rpk treatment to, and is a bad ass rifle
1 norinco 84s sidefolder that i bought long before the ban, so its al original, but mags are both exspensive, and dmaned near impossible to find! (hate proprietairy mags)
2 sar-1's one in regular comblock configuration, one i refinished the stock set green( is pictured in the red rifles forum on a link) and installed night sights!
1 sar-3 that i have redone with a magnolia state armory ar-15 mag adapter, and a brugger&thommett rail system(this fricking thing is awsome but cost more than the damned rifle!) aimpoint ml2, 4x magnifier, surefire tactical light with ir filters, sure fire green lazer, and mako vertical foregrip and a el-cheapo nightowl optics 2nd gen night scope yeah its one of my fun guns lol!!!
1 century arms bulgarian ak-74 thats just stock, with 9 30 round mags, plum colored furniture, sling, and bayonet (fun, accurate, cheaper to shoot right now than 47, a bit more range, and accuracy than 47, but not as hard hitting)
i saiga that i am currently doing a conversion on to put it back into military specs! just so i can say i actualy have a russian ak lol!!!!
now having fired alot fo ak's semi auto ones here in the states sometimes have whats reffered to as trigger slap! trigger slap is when you fire the rifle, and the trigger resets, and when it does sometimes it can have a painfull slaping feel to your trigger finger! this is caused by crappy machined triger group castings, that are not machined to the exact tolerances, and dimmensions of the original comblock parts! but with a little bit of hand fitting of the parts, can be made smoothe again!
some of the ak rifles i have use slant muzzle breaks, witch are used to keep the rifle more level and controlable under rapid fire(in theory at least) this slant is supposed to direct gasses exiting the muzzle up and to the right, and by doing so push the rifle down and to the left (once again that is the theory)
they are very light, very tough, and mine at least are quite accurate, and they require very little in the means of care, all the poor little things want is ammo, love, and something to blow to peices lol!!!!
i also have a few ak rifle kits that i put away along long time ago, and have a few reciever flats with rails, that some day when i have the time, i will assemble into working rifles!!!! there are 4 of them, and they are all from romanian G type rifles, and have pristine bores, and all matching numbers! i got these back when the kits where $65.00 at centerfire systems!!! wish i had bought more i could sell them now for about $400 each lol!!!!
will post pics soon of my ak's just so you can all drool, and ohhh and ahh!!!!
but if you guys want your own, its not to hard, just come on down here to america, get your citizenship, and enjoy bettter rights lol!!!!
and your all welcome here, because we sure could use more gun owners to help us vote, and most canadians speak english, and actualy have better job skills than the current flood of mexican trash thats flowing into my country!!!


















































