338 Lapua, 285 Hornady BTHP

I've been using them for awhile now with great results. Started with 300gr data for Retumbo ended up using 91.8 gr. Hovering around 2800 fps
 
Hijack alert !

My understanding is that the TRG-42 twist rate is not optimal for stabilizing 300 gr bullets so I've been using 250's. Is this 285 grainer a solution for those seeking the heaviest possible bullet for this rifle ?

Just wondering,, thanx.
 
Hijack alert !

My understanding is that the TRG-42 twist rate is not optimal for stabilizing 300 gr bullets so I've been using 250's. Is this 285 grainer a solution for those seeking the heaviest possible bullet for this rifle ?

Just wondering,, thanx.

I'm shifting from the 250 to the 285 so I'll let you know how it goes.
 
TRG-S, 26" barrel. First test loads shot at 100 yards, temp. +22, wind 0, elevation 3040 feet. Bullets, which are Moly coated, were loaded 25 thou. off the lands. Fed 215 primer, Lapua Brass, H1000 powder, 3 shot groups in half grain increments.
90.0 grains - average 2881 fps. SD 22.0 = 1.1" group
90.5 grains - average 2882 fps. SD 7.2 = 1.1" group
91.0 grains - average 2894 fps. SD 9.6 = 0.55" group
91.5 grains - average 2896 fps. SD 17.9 = 0.95" group
92.0 grains - average 2920 fps. SD 11.5 = 1.2" group

Chrono. used was a Pact Pro at 20 feet from the muzzle. No pressure signs with any of these loads in my rifle.

Obviously, I have some more work to do but this is a good start. Retumbo next.
 
Back
Top Bottom