Well, I didn't get any draws for moose this year so I guess it will be the usual white tail and mule deer as the victims. Last year I used .30-06 Springfield with a 168 grain bullet. I thought that was a bit of an overkill for deer, so this year I'm stepping it down a little. This year I'm using .308 Winchester.
Here is my load:
- 150 gr Nosler Spitzer
- 45.0 gr of H-4895
- CCI LR primer
- 1-F nickel plated .308 Win brass that I picked up at the range.
- COAL 2.810" (so that the rounds fit in the magazine, I stuck with this length)
It should take mule and white tail deer down without issue. Now all I have left to do is get my rifle sighted in. I'll be using a Tikka T3 Lite.
Here is my load:
- 150 gr Nosler Spitzer
- 45.0 gr of H-4895
- CCI LR primer
- 1-F nickel plated .308 Win brass that I picked up at the range.
- COAL 2.810" (so that the rounds fit in the magazine, I stuck with this length)
It should take mule and white tail deer down without issue. Now all I have left to do is get my rifle sighted in. I'll be using a Tikka T3 Lite.




















































