Can anyone import these barrels for the mosin nagant

M

mg4201

CGN Ultra frequent flyer
Rating - 100%
18   0   0
Location
Ontario
While wandering through the net last night I can upon a product being sold by TN guns in the us website is w w w dot tnguns dot com. The product is a heavy target barrel for the mosin made from czech uk 59 MG barrels. can anyone get them? I have cash in hand.
 
"does a barrel fall under the $100 exemption??"

No barrels and receivers need an import permit and need to be handled by a licensed importer/exporter.
 
I used Questar to get a replacement M98 barrel from the U.S. If I remember correctly, the barrel price could not be over $100 and the barrel was sent to their U.S. office for paperwork and clearance. There was a $50 fee for processing plus additional shipping to my place from their office.

If it's worth it to you, it is possible to import one. If you run the gauntlet without the paperwork, you run the risk of losing the barrel.

Stocks are different it seems. I have bought and had Mauser stocks shipped to me from the U.S. without needing any paperwork. Mind you, the stock prices were under $100 as they were beat up quite a bit but still usable. I always ask the seller on e-bay if they ship to Canada before you buy.
 
I checked questars website the price is 499.00 for import paperwork now. thank you all for your help. I am going to try westrifle sergey seems to be able to get combloc stuff pretty easily
 
Ryan500 said:
Man that is one fat barrel, .925 at the muzzle, looks like twice that at the reciever!
Click to expand...

yes it is very fat now but I have a huge lathe at work that will take .250 cuts on 3" 4140 all day long so if I can get it here it is making a visit to jenny craig :D
 
The M/N has the same thread pitch as a Rem 700 barrel why not rechamber a .30 cal takeoff barrel?Harold
 
mbogo3 said:
The M/N has the same thread pitch as a Rem 700 barrel why not rechamber a .30 cal takeoff barrel?Harold
Click to expand...

yes the thread form is the same but the shank on a mosin is .975 diameter and on a 700 it is 1.062. also I wolud have to hack off the breech end of a remington barrel to get rid of the recess for the bolt head. thank you for trying to give me a good solution though I appreciate the effort.
 
gaff said:
If you have a lathe . why not get a blank and make your own? seeing that your going to do most of the work aneyway.
Click to expand...

yes I can do that but the expense of a reamer added to a $300+ blank makes the barrel form TGI very attractive as it is only 80 us. thank you though.
 
Here's a stock for a heavy barreled Mosin...

muutos21.jpg


muutos22.jpg
 
You must log in or register to reply here.
Back
Top Bottom