where to buy the lee pro 100

The turret press is a great thing to have, you can reload up to a 150rds an hour and it's hard to make mistakes. After you buy a progressive the turret press remains useful for the many tasks involved in prepping rifle brass.
 
It's OK to buy from a Canadian supplier but only IF they stock it. Why would you buy from a local supplier when they have to order it in from the same place you could order direct?
 
If you are new to Reloading I would not recommend the Lee Loadmaster or 1000.

A single stage or turret press would be much better to start with.

I own most of the Lee presses and would recommend Lee Factory Sales (a business located near the Lee Factory, but not owned by Lee) if you want to purchase online.
 
If it's your first press, then don't get it.
There's A LOT that with each stroke of the ram,both up and down.
There 5 station's so each stroke does 10 thing's.
Something the blue boy's don't realize is the amount of thing's that happen with each complete stroke.
Get yourself a LEE classic cast 4 hole turret press,you'll like it.
Or send me a PM and I'll sell you a spare LEE 3 turret press ;)
 
zuke said:
If it's your first press, then don't get it.
There's A LOT that with each stroke of the ram,both up and down.
There 5 station's so each stroke does 10 thing's.
Something the blue boy's don't realize is the amount of thing's that happen with each complete stroke.
Get yourself a LEE classic cast 4 hole turret press,you'll like it.
Or send me a PM and I'll sell you a spare LEE 3 turret press ;)
Click to expand...

Good advice.
 
You must log in or register to reply here.
Back
Top Bottom