Sage EBR Question

[alpha niner]

Do I need a M14 Stripper Clip Sight Base with Picitanny Rail in order to use a Sage Cantilevered Scope Mount on a Norinco M305 Short Rifle with a Sage Stock System??? (example below)

 

[simpleton]

No, the Sage mount will come with that part if it needs it. That isn't a sage mount in that photo though.....Sage stripper-guide mount, but the optic "bridge" looks like an A.R.M.S. unit.



.

 

[alpha niner]

but if i bought the scope mount, will i need that little rail beneath it to mount onto it or not...

 

[simpleton]

If you buy the mount in your photo, then yes, you would have to find a sage stripper-clip mount......and good luck with that. Have you ever just considered buying a AR-15 cantilever mount and running it in reverse? Lots of guys go that route, and it's easier and cheaper to get that type of mount.

[/IMG]

 

[FabSports]

If you buy the mount in your photo, then yes, you would have to find a sage stripper-clip mount......and good luck with that.

I have in stock : http://www.fabsports.ca/stripper-clip-sight-base-picatinny-rail-p-964.html?language=fr

 

[simpleton]

I have in stock : http://www.fabsports.ca/stripper-clip-sight-base-picatinny-rail-p-964.html?language=fr

Well, there you go Buy it then, cause sage stuff is hard to find.



.

 

[graine de brioche]

Were are you going to buy your sage stock ?

 

[Satain]

[/IMG]

Nice pic simpleton

FabSports if I buy that rail that you linked for a red dot. Would it be a co-witness with a red dot? Or can I place the rail higher so that I can clear my irons?

 

[alpha niner]

Hey FabSports, what else do you have from Sage?

graine de brioche = getting my sage stock in january somewhere out west in canada

 

[FabSports]

It's all I have, I find few in a box from last order

 

[alpha niner]

It's all I have, I find few in a box from last order

So when Sage is done their big military order, are you going to restock items from Sage?

 

[wildphil24]

FabSports if I buy that rail that you linked for a red dot. Would it be a co-witness with a red dot? Or can I place the rail higher so that I can clear my irons?

Hey Joey, I thougt you didn't like the cowitness concept?!

A fastfire is too high to cowitness, I don't know for an Aimpoint micro.
I'm not sure I understand your last question but the rail is not adjustable. With nothing on the rail, you can use your iron sights.

 

[Clubhopper]

this is the sage cantilever scope mount...it comes with the piece to butt up against the stripper clip guide

here is how it will look like (my rifle for reference)

 

[alpha niner]

just what i needed

 

[wildphil24]

Clubhopper, where did you get your tan pistol grip?