Promag M1A/M305 Precision Stock PICTURE Review

[cody c]

Excuse a stupid question, but would the archangel fit the mini 14 target as well? Any feedback from someone who has done such a thing?

Definitely looks fun, wish we could use 20 round clips for those though.

 

[Mystic Precision]

No the mini 14 will not fit BUT promag is working on an ACR looking kit just for this rifle.

Hopefully, we will see production of this stock in the new year. There are youtube videos from SHOT 2011

Jerry

 

[bcgunkid]

tag

 

[Mystic Precision]

The Sparta mini 14 kits are now in production.

Jerry

 

[bcgunkid]

Some nice stuff in here

 

[M14Doctor]

The Sparta mini 14 kits are now in production.

Jerry

Damn,,,, now I'm gonna have to add a mini 14 to my collection

 

[bcgunkid]

Damn,,,, now I'm gonna have to add a mini 14 to my collection

Hey
Do you suggest anyone in Vancouver for M14's?
Thanks

 

[M14Doctor]

Hey
Do you suggest anyone in Vancouver for M14's?
Thanks

Not sure if they are sold out
For walk in touch n feel purchase.... Reliable Gun hands down.
For online service, a great choice and local to vancouver, Canadaammo, sponsor on this site.

 

[bcgunkid]

Not sure if they are sold out
For walk in touch n feel purchase.... Reliable Gun hands down.
For online service, a great choice and local to vancouver, Canadaammo, sponsor on this site.

Thanks for the info
What I meant was "Is there a good M14 Doctor in Vancouver"
My Bad

 

[courtsm3]

bump on this. looking to see if i can get my hands on this stock still? just ordered my m305 online today! looking to spice her up already

 

[factionrr]

I'm pumped should be just over a week until I get my archangel stock. I've got some new parts just sitting awaiting it. M14.ca CASM mount, Bushnell 10x40 Elite, Harris bipod adaptor with Harris swivel bipod and a little something custom I'm adding to the stock to make it resemble an actual JAE stock.

 

[Lost...again]

I'm pumped should be just over a week until I get my archangel stock. I've got some new parts just sitting awaiting it. M14.ca CASM mount, Bushnell 10x40 Elite, Harris bipod adaptor with Harris swivel bipod and a little something custom I'm adding to the stock to make it resemble an actual JAE stock.

Dont forget the rattle cans Theres a real beauty hidin in that stock

 

[factionrr]

Dont forget the rattle cans Theres a real beauty hidin in that stock

Actually I've been inspired and I'm almost ready to start spraying, just not sure if I'm going to spray the stock only or the entire assembly. On that note I recieved my stock yeaterday and put it together today. It was tight like unit should be but only required the slightest of filing to the trigger pads to get it to lock in. Should I still be worried about fitting the right side of the action? Looking at it, it appears to be level. I'll will post pics in the am

 

[Lost...again]

Actually I've been inspired and I'm almost ready to start spraying, just not sure if I'm going to spray the stock only or the entire assembly. On that note I recieved my stock yeaterday and put it together today. It was tight like unit should be but only required the slightest of filing to the trigger pads to get it to lock in. Should I still be worried about fitting the right side of the action? Looking at it, it appears to be level. I'll will post pics in the am

Way to go , it is a crap load of black close up tho. Like a blank canvas just waiting ...........
I had about 1/16 gap when I fitted mine and that disappeared when I grooved the right side, as in the tutorial pics.But if yours is flush I dont see any reason to file it.
At least you got it at last

 

[cody c]

just wondering if mystic will be stocking the new olive or desert tan archangels in the near future?

 

[EchoAlpha]

Does this stock make the rifle lighter or heavier?

 

[TheZreturns]

Does this stock make the rifle lighter or heavier?

This question was already answered by me on page 4, but i'll write it down again for you!

Promag Archangel M1A weight: 67.2 oz (4.2lbs)

Original USGI stocks weight:
Fiberglass stock USGI 11686428 46.2 oz (2.89lbs)
Fiberglass stock USGI 11686428 49.0 oz (3.06 lbs)
Fiberglass stock USGI 11686428 45.4 oz (2.84 lbs)
Walnut stock USGI 7790702 41.8 oz (2.61 lbs)
Walnut stock USGI 7790702 44.4 oz (2.78 lbs)

For your info: 1 pound = 16 ounces

So final answer, it's a little heavier but it's way more convenient...

 

[EchoAlpha]

Wow that's actually quite a bit heavier. Still at $300 the price is still right.

 

[TheZreturns]

Wow that's actually quite a bit heavier. Still at $300 the price is still right.

I'm telling you, you won't regret it after you've done all the fittings...

If you need to know how to fit your chinese norinco/polytech M305/M1A, into this stock, refer to this link:
http://www.mysticprecision.com/wp/1751/how-to-fit-a-m305-to-the-promag-precision-stock/

 

[Splatter]

Wow that's actually quite a bit heavier.

1.2-to-1.5 lbs heavier than a stone-stock USGI stock; but if you are going to use a scope, you've probably added a cheekpiece to your stock (1lb) and a some sort of bipod mount (0.25lb).