RC K98s at Fishing World... $599

If the Russians had done a nice job of preserving the captured K98's originally, had not used that horrible bluing and shellac job, these RC's would probably be worth even more (like the Yugo, and Norwegian refurbs)... Though I am sure the capitalist market system of Canada and the US was the LAST thing the Soviet Union was worrying about when right after a absolutely devastating war, they put these former fascist rifles into long term storage for future use... ;)

Still, love these RC's as they didn't obliterate most of the markings, unlike many Yugo refurbs... (Though I guess a poorly placed "X" and the ones with the peened markings kinda lose some value... I REALLY hate how on some stocks they took the belt sander to 'em!) :(
 
When I compare my Yugo refurb to the typical RC, there is really no comparison - the Yugo is much nicer. The wood is usually in better shape, often they have new Yugo-made replacement barrels with perfect bores, and many of the parts have the original blue. They also all still have original rods, hoods and captures screws.

Sure, the bolts are scrubbed and re-numbered and lack some of the WW2 markings, but so do many RC's. I use my capture Mausers as range gun so that the matching or bolt mis-match collectible examples can stay in the rack looking pretty and gaining value.
 
my yugo capture k98 came with an original sling, cleaning rod,rifle looks used a lot but like Claven2 said bore looks almost new and it did have the capture screws .Everything German except a few tiny fireing proofs have been scrubed and all new yugo serial numbers added real nice piece to have in a k98 mauser collection along with an RC K98
 
$400 for an RC K98 in the States...Duties, taxes, profit, mark up, middle man and expensive shipping is the difference we pay on this side of the border, not an increase in collectability for a mixmaster...otherwise the price would be the same in the USA, which it is not.
 
Imperfect as they may be, it's really nice to see some new stuff coming into the Canadian market over the last couple of years. For a while there it seemed like little new was coming in at all.
 
Well... I wrapped the stock in paper towels and placed in a plastic bag and put inside my hatchback (direct sun)... I'll give it all day tomorrow to "sweat out" the cosmoline:

9396072147_fbcd841497_b.jpg


In the meantime, I boiled a pot of "Soviet soup" to clean out all the metal bits:

9398837406_6125826c3b_b.jpg


I thoroughly cleaned out the barrel using Hoppes #9 and a brass brush, and followed by many pull throughs!

9398836140_4516cd0951_b.jpg


What appeared to be a "very good bore" at the store turned out to be a "good" bore. The lands are "very good" but the grooves have a mildly rough surface ("frosted") but no big pits. The photo makes it look worse. For the life of me, I couldn't capture the bore with any success. I would call the groves "semi-shiney". Hopefully, she turns out to be a good shooter. The crown looks good:

9396060405_2d4cd95c01_b.jpg


Just after the metal bath and a wipe down with G96. The typical peened waffenampts(!), but a nice rearsenaled Soviet finish. "ghn" on bolt shroud?

9396068135_3cefa11e6c_b.jpg

9398833388_449bf4fb25_b.jpg

9396056299_2a28beaa78_b.jpg

9398825582_41f13ed261_b.jpg

9396065731_42721e5a80_b.jpg

9396064459_c29c31de35_b.jpg

9398829652_d59852bbff_b.jpg

9396061845_c924fdb277_b.jpg

9398824188_89a20e411a_b.jpg
 
Last edited:
Back
Top Bottom