cant decide to save for a tavor or get this t97
I have both a tavor and a t97, don't bother with the t97
cant decide to save for a tavor or get this t97
I believe I fixed it for you, cuz if you are talking about the canam deal, they were supposed to have t97's in like 2007 , still have none.
When they get down to the $300-$400 range where they belong I might consider one. But only because Wendy doesn't want me to have it.
Not CanAm, Accuracy Plus has been selling the NSR for $850 from the start....
Not particularly interested in a gun that is essentially $1000 Chinese SKS
Not particularly interested in a gun that is essentially $1000 Chinese SKS
Really. So you're not interested in non-restricted military-ish rifles that take some 10 round LAR magazines?
Hum!
Fixed it for you.
It's a hit and miss rifle that is way more expensive than it needs to be. So no i really am not. My cr*p vz will have to do I guess
crap I just bought an hk45 instead of a t97...
bah, just another scrap black gun I will not use... unless I sell the su16F and get a t97? maybe one day.
or just get a tavor instead?
between the SU16 on one side, and the T97/Tavor on the other, the SU16 is scrap. Sell it if it doesnt snap on you first.
I don't understand why people are still crawling over one another for the t97. It's garbage. And a few pop up just fine, but some are showing abnormal wear from very little use, some are having mag compatibility issues, apparently none have a proper feed ramp, some have botched barrels with drill pressing a little down the bottom, completely messed up ergonomics, rubbish trigger, obscene bore offset, piss poor optics capability, unless you drop another what 300 on a flattop upper? All at the lovely gouged price of 1k or in this one 850 apparently. or 1150-1300 with the aftermarket ftu. Which then removes the standard irons so now you have to buy irons which is a minimum 100 if you find a good deal. See how this snowballs out to nearly double the price of a decent cz?
And yes the su16 is also utter crap. It is flimsy and built cheaply. Sorry that's just the simple facts keltec fanboys out there.
I don't understand why people are still crawling over one another for the t97. It's garbage. And a few pop up just fine, but some are showing abnormal wear from very little use, some are having mag compatibility issues, apparently none have a proper feed ramp, some have botched barrels with drill pressing a little down the bottom, completely messed up ergonomics, rubbish trigger, obscene bore offset, piss poor optics capability, unless you drop another what 300 on a flattop upper? All at the lovely gouged price of 1k or in this one 850 apparently. or 1150-1300 with the aftermarket ftu. Which then removes the standard irons so now you have to buy irons which is a minimum 100 if you find a good deal. See how this snowballs out to nearly double the price of a decent cz?
And yes the su16 is also utter crap. It is flimsy and built cheaply. Sorry that's just the simple facts keltec fanboys out there.
Have you even held a T97? Its one of the very few NR bullpup rifles in this country, and its not crap IMO. I had one and sold it simply due to the fact that I bought a KSG (not crap dont generalize all kel tec) but I will definitely buy one again in the future. If I bought the FTU I would put an optic on. Irons are not 100% necessary if you have a solid optic like a T1.
With regards to the CZ;
First off, you cant really compare the CZ and the T97. Different caliber, bullpup vs non bullpup, AR mags vs CZ mags (LAR mags/Beo mags) + the fact that T97 can be flat top after add on.
Also, these days CZ 858 are around $850-$900 stock with the import ban. Even IF you manage to get a CZ at retail price around $700, thats plus a rail system (~$150) and a better stock as the original one sucks (~$150+) so how is the T97 double the price if the CZ is at least ~$900 after necessary mods? (assuming you can get retail price on gun, unlikely) Either way you look at it your wrong IMO.
Have you even held a T97? Its one of the very few NR bullpup rifles in this country, and its not crap IMO. I had one and sold it simply due to the fact that I bought a KSG (not crap dont generalize all kel tec) but I will definitely buy one again in the future. If I bought the FTU I would put an optic on. Irons are not 100% necessary if you have a solid optic like a T1.
With regards to the CZ;
First off, you cant really compare the CZ and the T97. Different caliber, bullpup vs non bullpup, AR mags vs CZ mags (LAR mags/Beo mags) + the fact that T97 can be flat top after add on.
Also, these days CZ 858 are around $850-$900 stock with the import ban. Even IF you manage to get a CZ at retail price around $700, thats plus a rail system (~$150) and a better stock as the original one sucks (~$150+) so how is the T97 double the price if the CZ is at least ~$900 after necessary mods? (assuming you can get retail price on gun, unlikely) Either way you look at it your wrong IMO.




























