Norinco 1911 Government Model + 1000 rds Combo Deal $499-

[Standingtall]

Polish the rails. Run some 1000 grit sand paper along the frame rails and slide rails... and polish the feed ramp. Fixed my issues.

 

[Gun_nutz]

Next time i go to crappy tire, im going to get some lapping paste. The slide could really use some smoothing. I tried a kimber at the range. I shouldn't have. What a sweet gun!

 

[Akito]

Next time i go to crappy tire, im going to get some lapping paste. The slide could really use some smoothing. I tried a kimber at the range. I shouldn't have. What a sweet gun!

I did this when I first got the gun. It was all apart in pieces to clean out all the packing grease, so this was a quick additional step before lubing.

It made a huge difference.

I did pick up some blueing compound to apply to the rails post lapping, but I haven't applied it as of yet, only because I don't feel like stripping it clean again as of yet. Perhaps once I get through a bunch of rounds I will repeat the detail cleaning process.

 

[trebor2880]

Polish the rails. Run some 1000 grit sand paper along the frame rails and slide rails... and polish the feed ramp. Fixed my issues.

Going through half a case, solved mine.

 

[H.K.Glock 007]

Is it too late to get one of these? ;-)

 

[trebor2880]

Is it too late to get one of these? ;-)

You can get the gun, but no ammo.

 

[Gun_nutz]

Polish the rails. Run some 1000 grit sand paper along the frame rails and slide rails... and polish the feed ramp. Fixed my issues.

Thanks i just read your post, that sounds good, im heading to crappy tire soon. I will get some sand paper. I should be going to the range tomorrow, i will report my results

 

[Mister Donut]

The deal has gone, but would most folks agree that this could be the official/unofficial Norinco 1911 thread? Or is there one already?

Anyway, for the 1911 from the Can Am deal, I suggest a nice pair of wood grips, it really makes it pop:

http://4.bp.########.com/-4Q8l91nKtHs/UsTfL-MIDnI/AAAAAAAASp8/RW0kwfkozzM/s1600/DSCN4622.JPG

http://1.bp.########.com/-Gca2TtkwVUY/UsTfMjrK7eI/AAAAAAAASqE/fp_NQ348hZQ/s1600/DSCN4623.JPG

http://1.bp.########.com/-deqW7L1zRAM/UsTfL-7m7VI/AAAAAAAASqA/tvG9qdLY1Hc/s1600/DSCN4624.JPG

Just got these grips in the mail from Springfield Armories.

 

[1000yards]

Some of us are still holding out hope that it'll return...somehow

 

[stripperclipper]

It will live on forever in our hearts...

 

[GUB]

Is there a rear sight adjustment tool ? Or a vice and a ball peen hammer???

 

[Maverick.flhx]

Is there a rear sight adjustment tool ? Or a vice and a ball peen hammer???

There are special tools for it.... it's like a vise, with an extra bolt through a blok that pushes on the rear sight

 

[Mwhite]

Is there a rear sight adjustment tool ? Or a vice and a ball peen hammer???

Used one of these to move mine works well

http: //www.ebay.ca/itm/Handgun-Front-Rear-Sight-Pusher-Universal-Sight-Tool-GLOCK-SIG-1911-others-/171203104786?pt=LH_DefaultDomain_0&hash=item27dc801012&_uhb=1

 

[ben777lemay]

wow 427000+ views !!!

 

[bobdbldr]

Probably the best deal in recent history on this site,,, until he brings in the Garands! ;0)

 

[caramel]

This deal had to be bought... Period. JP.

 

[silverfoxdj]

I resist Help me..

 

[dinhulks]

Tried to order but can't find the combo. Out of stock?

 

[ben777lemay]

yup Out Of Stock !!!

 

[Steijaka]

Hope this deal comes back!