10/22 barrel

Jamie

Jamie

"REDBEARD"<br>Super Moderator
Moderating Team
Rating - 100%
123   0   0
Location
Earth
Looking for a good 16/18" barrel

Looking to built up a trainer ( PRS)

What dealers should I look at?
 
For your purpose i would check out dlask. The ultra light aluminum barrels such as tactical solutions might not fit the bill as well.
 
If you are making a PRS trainer my guess your rifle is what 14#? My guess you want some weight to it?

Dlask would be the heaviest barrel you can find, but fairly accurate.
 
Drop it in a Troy or SR22/Nordic Chassi and be almost like your TAC21. With a Dlask 8".920 barrel, Moe grip, 9" forearm, SR22 chassi, fake suppressor, CTR stock, with 2X scope my 10.22 was around 7lbs. I'm sure if you put a A2 stock, a much heavier set of rings, 12-15" forearm, bigger scope, a 16" .920 barrel, you could push it over 11lbs, if needed weight the stock.
 
Still what is your end goal?
A tacticool 10/22 or a trainer .22?
By the sounds of it 25yds-50yds.
If your going out to 100+ imo a volquartsen, kidd or Magnum research is what you need for a 10/22.
 
I have a Nordic chassis ( SR22) but a short barrel already.


Will mount a nightforce on it and shoot from 25 to 200 meters. 50/100 most common.
 
little_airwolf said:
Still what is your end goal?
A tacticool 10/22 or a trainer .22?
Click to expand...

OMG you gotta be some kinda well I cannot say it. He wants a trainer for PRS. Do you even know what PRS ? Its precision rifle series. Take that and put it into the search bar and let me google that for you. If you did a little digging you find out what Jamie runs.

Jamie runs like a 15+ pound rifle so I think he would want a heavy rifle to match. Not your light weight kiddy guns.
 
OkayShooter said:
Drop it in a Troy or SR22/Nordic Chassi and be almost like your TAC21. With a Dlask 8".920 barrel, Moe grip, 9" forearm, SR22 chassi, fake suppressor, CTR stock, with 2X scope my 10.22 was around 7lbs. I'm sure if you put a A2 stock, a much heavier set of rings, 12-15" forearm, bigger scope, a 16" .920 barrel, you could push it over 11lbs, if needed weight the stock.
Click to expand...


Pretty much this!

Have a lot of spare parts around to build it. Just need the barrel
 
langbanger said:
There is no reasoning with him.

A troy chassis, dlask 18" barrel and a magpul prs stock would be a pretty sweet setup.
Click to expand...

I agree, I noticed VQ heaviest barrel they got is the weighted muzzle one.

Jamie if your going to put the heaviest barrel, Might I suggest upgrading the Vblock to a adjustable ( Or drill and tap for a small set screw ). It raises the barrel to comp for the barrel droop of the heavy barrel. So you don't need to use more elevation to comp.
 
You must log in or register to reply here.
Back
Top Bottom