10/22 photos - post 'em up here!
- Thread starter mchaley
- Start date
I just recently completed the build for my girlfriend, both rifles now sport Dlask .920 thread protectors which I like better than the goofy flash hiders. Lol hers is a NEA 12" match chambered .920. It actually shoots really, really well. Mine has a Dlask 16" sporter chamber .920, shoots good as well. Both have hogue overmold stocks, both have JB weld trigger jobs, high power optics, Kidd and VQ ectractors, polished and radiused bolts, tuffer buffers, and mine has a VQ trigger shoe and PWS T3 mag release.
brentRnelson
Regular
- Location
- Fraser Valley
Last edited:
- Location
- Richmond, BC
Kind of surprised I haven't seen the Magpul Hunter 22 posted here yet, saw it down at Cabela's, almost picked it up, but I really like my Hogue stock....maybe I'll go back and grab it just for the hell of it.
christos808
Member
- Location
- Niagara Region
I've been working on this one for a while. It's finally at a stage when I'm ready to post photos.
Stock: Bell & Carlson Stock - 10/22 - Anschutz Style - Target Heavy Barrel - Olive and Black $345.14 Prophet River
Receiver: DAR-22 7075-T6 Receiver with Integral Picatinny Rail $276.27 Dlask
Barrel: Dlask 10/22 .920 16.5" Bull Barrel with Thread protector, Sporter Chamber, Matte Finish $242.93 Dlask
Trigger: Kidd Single Stage Trigger Pack $358.76 Dlask
Bolt: Kidd CNC Black Scalloped $280.95 Fabsport
Charging handle: Kidd Cocking Assembly 64.64 Fabsport
Bolt buffer pin: Kidd Bolt Buffer $8.98 Fabsport
Scope: Mueller APV AO Rifle Scope, Black, 4.5-14 x 40mm 169.44 Amazon.ca
Rings: Burris Signature Zee Rings (1" Matte Med) $80.16 Cabela's
Original Ruger 10/22 parts
Hex takedown screw
V-block
Trigger pins
Stock: Bell & Carlson Stock - 10/22 - Anschutz Style - Target Heavy Barrel - Olive and Black $345.14 Prophet River
Receiver: DAR-22 7075-T6 Receiver with Integral Picatinny Rail $276.27 Dlask
Barrel: Dlask 10/22 .920 16.5" Bull Barrel with Thread protector, Sporter Chamber, Matte Finish $242.93 Dlask
Trigger: Kidd Single Stage Trigger Pack $358.76 Dlask
Bolt: Kidd CNC Black Scalloped $280.95 Fabsport
Charging handle: Kidd Cocking Assembly 64.64 Fabsport
Bolt buffer pin: Kidd Bolt Buffer $8.98 Fabsport
Scope: Mueller APV AO Rifle Scope, Black, 4.5-14 x 40mm 169.44 Amazon.ca
Rings: Burris Signature Zee Rings (1" Matte Med) $80.16 Cabela's
Original Ruger 10/22 parts
Hex takedown screw
V-block
Trigger pins
Last edited:
Well congratulations, however you do know that this is a 10/22 Photo thread right?
just put a new rds on mine
What red dot is that. I'd like something simular for my SR-22
TV-PressPass
CGN Ultra frequent flyer
- Location
- Mountains, Alberta
Muh bebe:
Details:
Back during the Secret Sniper exchange on /r/canadaguns I got an awesome HC3R 10-22 magazine. At the time I had a receiver, and that was it. Well now I've finally got a barrel and a stock, and put the whole thing together!
Disclaimer, this stock came as a folder, but in order for it to remain non-restricted with the 11.5" barrel I had to JB weld it permanently open. So OAL is 31 inches and we're good to go across Canada. Pew pew!
The only thing I'm worried about now is parallax through the Viper PST at 50 yards or so. Here's hoping my target stays in focus!
Details:
- Vanilla 10-22 reciever
- Dlask 11.5 barrel
- Fab Defense 10-22 stock
- Vortex Viper PST 2.5-10
- HC3R Mag & Stripper clip
Back during the Secret Sniper exchange on /r/canadaguns I got an awesome HC3R 10-22 magazine. At the time I had a receiver, and that was it. Well now I've finally got a barrel and a stock, and put the whole thing together!
Disclaimer, this stock came as a folder, but in order for it to remain non-restricted with the 11.5" barrel I had to JB weld it permanently open. So OAL is 31 inches and we're good to go across Canada. Pew pew!
The only thing I'm worried about now is parallax through the Viper PST at 50 yards or so. Here's hoping my target stays in focus!
Muh bebe:
Details:
- Vanilla 10-22 reciever
- Dlask 11.5 barrel
- Fab Defense 10-22 stock
- Vortex Viper PST 2.5-10
- HC3R Mag & Stripper clip
Back during the Secret Sniper exchange on /r/canadaguns I got an awesome HC3R 10-22 magazine. At the time I had a receiver, and that was it. Well now I've finally got a barrel and a stock, and put the whole thing together!
Disclaimer, this stock came as a folder, but in order for it to remain non-restricted with the 11.5" barrel I had to JB weld it permanently open. So OAL is 31 inches and we're good to go across Canada. Pew pew!
The only thing I'm worried about now is parallax through the Viper PST at 50 yards or so. Here's hoping my target stays in focus!
Looks awesome! I think this will be my next 10/22 stock.
So, is your 31" OAL including the compensator/flash hider on that barrel, or without? Sorry if that sounds like a dumb question; I've just read that some people include the flash hider length while others don't.
Thanks!
Last edited:
TV-PressPass
CGN Ultra frequent flyer
- Location
- Mountains, Alberta
OAL is OAL, so yeah I'm including the flash hider. Muzzle devices don't count when it comes to barrel length
Sorry, missed your post. It's a Green Mountain 18" blue bull GMR901500, but the bloop tube is approximately 12" IIRC.
Its a TUBB grip.
Here's my latest creation. Probably going to dump the Vortex Strike fire in favor of something lower profile, or just find some iron sights:
Looking for a UTG quad rail right now. I really liked factionrr's short-barrel 10/22 which had one which he cut down the UTG rail.
Looking for a UTG quad rail right now. I really liked factionrr's short-barrel 10/22 which had one which he cut down the UTG rail.
Actually, I believe the law is OAL of 26" or longer. Mine above is about 27.5" with compensator.
