10/22 photos - post 'em up here!

[panaan25]

SBI Spectre Chassis and Grey Birch 12.5 Inch Barrel

New build that I decided to splurge on.

-Factory Receiver, bolt and trigger group.
-Volquartsen Firing Pin and Extractor
-SBI Spectre Chassis
-Grey Birch 12.5" Carbon Fibre Bull Barrel
-MOK Grip
-AR Buffer Tube and aluminum butt plate
-Vortex Venom 3MOA Red Dot
-USGI sling with QD swivels.

Will eventually get a Kidd 2-Stage Trigger when I have the funds.

 

[ben777lemay]

New build that I decided to splurge on.

-Factory Receiver, bolt and trigger group.
-Volquartsen Firing Pin and Extractor
-SBI Spectre Chassis
-Grey Birch 12.5" Carbon Fibre Bull Barrel
-MOK Grip
-AR Buffer Tube and aluminum butt plate
-Vortex Venom 3MOA Red Dot
-USGI sling with QD swivels.

Will eventually get a Kidd 2-Stage Trigger when I have the funds.

Nice little 10/22 you have there, must be light.

For more *tactical* application, I would go with a Kidd single stage trigger.

I have both the single stage and 2-stage Kidd triggers and they are both amazing.

Midwest Industries Fixed Barrel chasis 13"
Midwest Industries Picatinny Rail
SR-22 Receiver and bolt
Factory trigger
DLASK 16.5" heavy barrel (.920)
KIDD Charging Handle
KIDD Recoil Spring and Polished Guide Rod
Pinned BX-25 mag
*and a bunch of take off AR parts

Bad ass looking 10/22 !

 

[ben777lemay]

Here is one of mine :

Tuff22 30moa receiver
Dlask bolt
Kidd match fluted and threaded barrel ( 20 inches )
Kidd 2 stage trigger
Kidd bits and pieces
Victor Company Titan stock
SWFA SS 20X42 scope in MDT rings

This rifle made the 1/2 challenge : https://www.canadiangunnutz.com/for...-Prove-it!?p=18200463&viewfull=1#post18200463

 

[regulate34]

I just built a Dlask/Kidd 1022

Tuff-22 integrated pic rail reciver
16.5” stainless Dlask barrel
Kidd single stage trigger
Kidd bolt
Kidd trigger pins
Dlask takedown screw
Dlask charge rod/handle
Hogue over molded stock
Bushnell RSX 100 Red dot

Unfortunately I reached my pic limit here

 

[planemaker]

Deleted

 

[Grey Birch]

Here are two of our RDR rifles.

 

[ben777lemay]

Here are two of our RDR rifles.

I would like to see them unfolded...

 

[Grey Birch]

I would like to see them unfolded...

Done.

 

[ben777lemay]

Done.

Thx ! Great looking rifles, must be fun to shoot such lightweight and short rifles.

 

[Inspecta Heavy]

Can anyone recommend a place to get an extended mag release and an oversized charging handle? I wanna get something in different color but haven't had much luck finding Canadian dealers that do them.

 

[sunmoong]

Can anyone recommend a place to get an extended mag release and an oversized charging handle? I wanna get something in different color but haven't had much luck finding Canadian dealers that do them.

Dlask Arms

 

[Bartok5]

Here's my 10/22 Takedown with a Dlask 9" Carbon-Fibre tensioned Barrel.

 

[uAJollyRogering]

Here's my 10/22 Takedown with a Dlask 9" Carbon-Fibre tensioned Barrel.

i never got an answer out of them if that optic mou t was reversible. thank you for being a guinea pig.

 

[OkayShooter]

Here is my 10/22 Target Lite, weighing 7.5# It has a Alum sleeve tensioned barrel. 4" of the barrel is steel .920 OD, then it is turned down to a sporter profile, and a alum sleeve slide over, and tensioned. Maintaining a .920" OD.

Base rifle w/o scope and Bipod is only like 5.2LB

 

[uAJollyRogering]

delete

 

[212driller]

Gonna have to build one of these magpul takedowns they look super nifty. I sold my krinker 9" a while back and have been kicking myself ever since. It was a handy durable little thing.

 

[jacotsmith]

I have a 9" magpul takedown thingy and the utility of it cannot be understated, not to mention the good, cheap fun factor.

 

[uAJollyRogering]

Do it.

 

[PPCLI-Jim]

https://www.youtube.com/watch?v=CMk8CHL6fVA&t=315s
No pic but rather a video

 

[burns k31]

Here's my 10/22 Takedown with a Dlask 9" Carbon-Fibre tensioned Barrel.

Very cool