10 gauge slugs

[458lott]

anyone here, know how to load 10 gauge slugs? i would like to get a mold and start loading. i need advice on a press to. ty

 

[AManWithAGun]

How about trying a stack of pennies glued together and see how well it works ? It certainly LOOKS much easier than melting lead, and you can adjust the weight of such slugs very easily.

 

[manbearpig]

 

[mmattockx]

Try this in the reloading forum, maybe look up the 12ga from hell thread, they have some 10ga info in there, too.

Mark

 

[Turkeyslayer 1300]

I'm sure if you could get ahold of a Lyman Reloading Handbook and followed their procedure for loading round ball loads it would work. As for a press I think that a MEC or similar would be your best bet, you could use an over ball wad and crimp to that or cut down 31/2 shells and just use white glue to attach an over ball wad.Load data might be a challenge however I'm sure you could CAREFULLY extrapolate from shot loads.

 

[curtmg]

How about trying a stack of pennies glued together and see how well it works ? It certainly LOOKS much easier than melting lead, and you can adjust the weight of such slugs very easily.

I need to load some slugs for a 2 bore, anyone have any Nickels I could borrow?

 

[723723]

shotgunworld.com is your best place for sound advice, folks over there have come up with some insane loads (a.k.a dinosaur rounds)