Where do you buy cloverleaf bullets???
Picked up a dandy 99A (finally) from one of the posters above . Grandson whacked his first coyote with it over the holidays - he's left handed so it works well.
He mentioned it was a 'real nice little gun' and I reminded him whose truck it belonged in ��
I have a mid 50's model 99eg in .250. Been in the family since it was new. Really want to try reloading for it but all the bad press about the 1-14 twist has me holding off.
If anyone has a good place to start as far as reloading goes I'm all ears....
Well! I don't know that I would have sold you that rifle, had I known you might use it to kill cuddly little yodel dogs!
I'm glad it's working for you; I had it a couple years and it stayed in the safe while I took my other .250's to the ball.
I have a mid 50's model 99eg in .250. Been in the family since it was new. Really want to try reloading for it but all the bad press about the 1-14 twist has me holding off.
If anyone has a good place to start as far as reloading goes I'm all ears....
What are you shooting in it now? Short for weight bullets will work better in a slow twist. RN bullets for example.I have a mid 50's model 99eg in .250. Been in the family since it was new. Really want to try reloading for it but all the bad press about the 1-14 twist has me holding off.
I have a mid 50's model 99eg in .250. Been in the family since it was new. Really want to try reloading for it but all the bad press about the 1-14 twist has me holding off.
If anyone has a good place to start as far as reloading goes I'm all ears....
What are you shooting in it now? Short for weight bullets will work better in a slow twist. RN bullets for example.
I have a 1921 1899 in .250 and a 1947 EG and have shot half-MOA groups with both. No secret to reloading, either.
I used Reloder 15 powder, and these bullets: Remington 100-grain Core-Lokt PSP, Sierra 100-grain PSP (NOT the boattail!!!) and Speer 100-grain flat base.
Book max is 36 grains of Reloder 15; I started lower and worked up to 35.5 grains in the 1899 and 35.0 grains in the 99EG.
Lots of people will tell you 87-grainers shoot more accurately but not in my rifles; best I could get was 1.25 inches at 100 yards with 87 Hornadys.
Both my rifles used Leupold 2-7X33 scopes. If your rifle is not drilled and tapped, I know a guy who makes no-drill, no-tap 99 and 1899 bases that use Leupold-style rings. Well worth the $200.00, IMHO.
Don't know if you'll recheck this thread so will PM too.




























