300 wsm

[hanks]

Any one have a best all around hunting (deer, moose and elk) load they use for their 300 wsm ? I was thinking of using 165 grain ttsx but would like to hear other's experience with this caliber.

Thanks,

Hank

 

['Boo]

After trying many different bullets I have settled on the Nosler 168 grain E-Tip.

 

[Mad_Mikee]

I'm just getting ready to start building loads with a 165gr Hornady GMX. Sounds like similar performance to the TTSX but a bit cheaper.

 

[Ron AKA]

I load for the .264 WM but in 30 cal I would use a Sierra 165 grain GameKing for deer, and a Nosler Partition 180 grain spitzer for elk and moose.

 

[Eagleye]

In my 300 WSM, I am using the Hornady 165 GMX.
Chased by Reloder 17, it is a great load in my Vanguard.
Of course, you would have to do some development to see which bullet/powder
combination works best in YOUR rifle.
Regards, Dave.

 

[stubblejumper]

If it shoots well in your rifle, the 165gr TTSX would be a fine choice.

 

[Ltbull01]

300 WSM, Win case, WLRM primer, 165 gr TSX, 69.5 gr RL19 for 3030 fps. MOA. Devastating!

 

[scott_r]

Im pushing a 180 accubond in my 300 wsm around 2900 fps it kills anything it touches. I could get more velocity but I don't like seeing any pressure signs.

 

[Cummins]

200gr game king 2900fps rl19

 

[tabs4u]

H4350 and 180 gr Balistic Tips for 3010. My go to load for everything

 

[ruger22]

168g TTSX
H 4350
3000+ fps
Works real well in the sako 75

 

[skidderman]

Either 180 grain bullet with 69 grains RL22 for about 2900 fps or 180 grain bullet with 62 grns RL17 for about 3000 fps. The RL17 load seems hot, the rl22 does not. All in browning a bolt 300 wsm

 

[Gatehouse]

I use the 130gr TTSX at 3500 fps 150gr TSX at 3250 FPS, 180gr TSX at 3000 fps and I would like to try the 175gr LRX too. I've shot Parttions, Hornadys and Accubonds, too, but mostly reach for the 150gr TTSX.

 

[bcsteve]

I couldn't decide between the 168gr or 180gr TTSX for mine so I went with the 175gr LRX . RL19 and the 175gr LRX at 3000 fps.

 

[The Outsider]

I've worked up a few different loads with 180 grain bullets for my 300 wsm.

Using both IMR 4350 and RL17.

Interbonds, Interlocks, and Accubonds.

All deadly accurate.

All averaging about 2950 FPS.

 

[mikeelliot]

H4350 and 208AMAX at almost 2700fps in my heavy pig shoots pretty damn good...

 

[skidderman]

I am sort of satisfied on accuracy with RL17 but wonder if I can't do better. I see a few of you using H4350 and I've read that a few guys are having good luck with IMR7828SSC. Would like to try these powders out but getting sick of spending dollars on powder & then changing my mind. If any of you can comment both on speed & accuracy I'm sure there are more than a few of us interested. Seems like 3000 fps with 180's is fairly achievable but if the accuracy isn't there it sucks.

 

[hanks]

Anybody try 200 grain hornaby eld-x ?