338 federal barrel lenght

I think that is why I like kipplauf or falling blocks rifles, you can still have a 22-24” barrel while keeping the overall length short and compact!
 
Last edited:
I like 21-22" barrels; seems a reasonable compromise between performance and handling, and it's aesthetically pleasing as well. I would only go below 20" if it were a full length mannlicher style stock.
I had a Ruger RSI for a time, and still wish I had it at times. It was a nice, light, easy handling rifle, but it had some bark, and a fireball from the muzzle that you could see in bright sunshine.
The 376 Steyr I mentioned above having the Wenig pepper laminated mannlicher stock has a 21" barrel. Handles nicely.
Scoped rifle with a full magazine weighs in at 10 lbs 7 oz. Pussycat to shoot even off the bench.
 
  • Like
Reactions: DGY
Agreed. A Ruger No.1A with a 22" barrel handles really well.
For circa 10 years, I hunted deer in Saskatchewan with Ruger 1A in 7x57 - sold that rifle - last I heard it was still getting deer in coulees in Southern Sk. I would agree - it was very nice handling. Ended up various scopes at different times - I think I last used it with Leupold M8-6X scope on it (maybe M8-4X), a rear offset ring - I loaded 150 grain Partitions for it - it fired many hundreds of those.
 
  • Like
Reactions: DGY
Good day all, as some of you know I’m looking into building a short action 338 federal for a “truck” gun. And one of a possible donner gun could be a Remington model 7 and they seem to comme more often than not with 18.5” barrel. My original plan was a 20” barrel… I know 1 1/2” difference don’t make a difference that said going from 24 to 22 at 22 you still have quite a bit of velocity to start with from 22 to 20 well there is a bit of compromise on usable distances to achieve proper terminal velocity/energy. Then you go down to 18.5 do I still have a 300 yard moose and bear gun?
I think in those mod 7 max coal is like 2.85”
I would like to shoot 200gn bullets, so I assume will possibly take over some of the powder capacity?!?!

At 18.5” it would definitely make for a true truck gun!!
use a long action to give you more options if you want to use a 225 or 250gr. if you are limiting yourself to 200gr or smaller then just get a .30-06
 
use a long action to give you more options if you want to use a 225 or 250gr. if you are limiting yourself to 200gr or smaller then just get a .30-06
I already have 3 30-06’s….
Yeah the long action would be an option but I’m not looking for a rebarrel but a rebore from Gerard Smith.
Anyway i will find something!!
 
Came here to evangelize all y'heathens on the true way of the single shot, but I see it's just been done. A break action single shot is IMO, the *ideal* truck gun. They're quite a bit shorter overall due to the lack of an 'action', so even if the barrel length is the same, the OAL will still be a good 4 to 5" shorter on the break action. And for a truck gun, it's super quick to go from 'unloaded' in the truck to 'loaded' as you hop out; no magazine to fuss with or to unload when you get back in.


Though I think you'll struggle to find one in 338 Fed, and you'll probably find it more expensive to re-barrel too - though it might be handy to have a switch-barrel system like with an Encore or something. Personally, for a truck gun, I'd pick up a 35 cal and call it a day. The Legend, the Buckhammer, and the Whelen are all obtainable in a CVA scout or maybe a Henry SS. Or get the Henry in 357 and have it reamed out to 357 Max, and shortened to 18.5" while you're at it. (though 'Max' might not be necessary, my Henry gets ludicrous speeds with ordinary 357 ammo, loaded toward the top end of the published data; over 2000fps with a 158 grainer.)


I also saw some Rossi LWC's out there in 8.6 Blackout; pretty similar to the 338 Fed.
 
  • Like
Reactions: DGY
While it is not a 338, I ended up putting together a 16" barrel rifle for this years hunting. This is after using a 20" ruger no 1 the last 2 years.

I'm in love. Sure I had to add a 3" break on it to tame it to a push rather than a kick, and that extended the length overall, it is still a very maneuverable pc in the hands. 45 Raptor. It is a very loud shooting rifle, but it makes for a sweet spot. I push 290 gr solid copper at roughly 2250 fps.

I would shy away from the henry single shots. I tried one in the 223 and found that in order to use the hammer properly I needed to have the scope sitting up too high, and that in turn posed the cheek weld issue to deal with.

The CVA are a different beast. I have used the 444 and enjoyed it, before acquiring the #1. Once I had the #1 the cva went for a walk about to a new owner. Currently own a 6.5 CM in the cva, and was looking at the 44 mag, before I ended up with the mares leg with the full stock. The mares leg is more versatile for me.

If you want a short 44 mag to get rid of ammo, look at the mares leg. 12" barrel, lever action. Once you add a standard butt stock to it you have an awesome wielding rifle. Will be a no brainer rifle for deer, bear with in 200 m.
 
Back
Top Bottom