.357 Mag Heavy Bear Load

I made 180gr LRN max loaded with h110. I'd shoot them into the ends of blocks of firewood 16 to 18 inch. I also did this with 240gr LSWC 44 mags and 300gr LWFNGC loaded as hot as I could. Both in 12in carbine barrels.

For what it was worth I recovered almost all of the 44 cal bullets. 300 deeper than the 240. I had a hard time recovering the 180 LRN. They would over penetrate the 44 and usually completely through the blocks.

All that I learned in this case was the 180RN to penetrate deeper than a 300WFN. Just thought Id share.

I still prefer the bigger hole.
Did you chrono any of these? Great penetration.
 
where are you going to carry your handgun for bear protection
not in canada .
A 357 is not enough cartridge for grizzly .
If you have ever been beside a live or dead grizzly you would know that it is not enough
i have seen a grizzly shot with a 375h&h destroy ed the lungs and it was still on its feet for 30-40 seconds
Agreed 357 is minimum better 44 or SW 500, but there is balance between controlling and open/concealed carry in hiking or camping (unfortunately not in Canada). Bear Spray is still the top 1 tool based on data. This topic is about if spray does not work and you only have a 357 revolver as side arm when being charged by a bear, what ammo should be carried in this situation.
 
Back
Top Bottom