Johnn Peterson
CGN Ultra frequent flyer
- Location
- Chemainus B.C.
I have a pair of rifles, chambered in 358 Norma Magnum. Recently I acquired two boxes of 310gr Woodleigh Weldcore RN SN bullets. Anyone have any load data they'd like to share??
Cartridge : .358 Norma Mag.
Bullet : .358, 310, Woodleigh SN WeldCore 54
Useable Case Capaci: 74.644 grain H2O = 4.847 cm³
Cartridge O.A.L. L6: 3.346 inch = 84.99 mm
Barrel Length : 24.0 inch = 609.6 mm
Predicted Data for Indicated Charges of the Following Powders.
Matching Maximum Pressure: 55839 psi, or 385 MPa
or a maximum loading ratio or filling of 104 %
These calculations refer to your specified settings in QuickLOAD 'Cartridge Dimensions' window.
C A U T I O N : any load listed can result in a powder charge that falls below minimum suggested
loads or exceeds maximum suggested loads as presented in current handloading manuals. Understand
that all of the listed powders can be unsuitable for the given combination of cartridge, bullet
and gun. Actual load order can vary, depending upon lot-to-lot powder and component variations.
USE ONLY FOR COMPARISON !
137 loads produced a Loading Ratio below user-defined minimum of 80%. These powders have been skipped.
Powder type Filling/Loading Ratio Charge Charge Vel. Prop.Burnt P max P muzz B_Time
% Grains Gramm fps % psi psi ms
--------------------------------- -----------------------------------------------------------------
Alliant Reloder-26 100.2 74.1 4.80 2523 100.0 55840 9558 1.307 ! Near Maximum !
Vihtavuori N560 102.3 71.9 4.66 2469 96.6 55840 9703 1.298 ! Near Maximum !
Alliant Reloder-22 102.5 71.3 4.62 2455 98.3 55840 9392 1.304 ! Near Maximum !
IMR 7828 SSC 100.9 71.3 4.62 2452 96.9 55840 9370 1.293 ! Near Maximum !
Alliant Reloder-17 89.7 64.8 4.20 2440 100.0 55840 8363 1.308 ! Near Maximum !
Ramshot Magnum 102.8 77.0 4.99 2440 98.7 55840 9060 1.312 ! Near Maximum !
Alliant Reloder-23 104.0 70.0 4.54 2425 100.0 54065 8485 1.322
Alliant Reloder-16 95.7 64.1 4.16 2413 100.0 55840 8231 1.323 ! Near Maximum !
Alliant Reloder-19 98.8 68.0 4.40 2409 98.1 55840 8881 1.315 ! Near Maximum !
Ramshot Hunter 94.2 66.9 4.34 2408 99.7 55840 8635 1.321 ! Near Maximum !
Hodgdon H414 88.8 64.6 4.19 2397 99.3 55840 8600 1.327 ! Near Maximum !
Winchester 760 88.8 64.6 4.19 2397 99.3 55840 8600 1.327 ! Near Maximum !
Vihtavuori N550 90.7 63.8 4.13 2387 100.0 55840 8343 1.337 ! Near Maximum !
Hodgdon H4831 SC 100.2 69.7 4.52 2383 96.1 55840 8720 1.314 ! Near Maximum !
IMR 4831 98.1 64.6 4.19 2372 100.0 55840 8049 1.340 ! Near Maximum !
Hodgdon Hybrid 100V 96.1 64.0 4.15 2358 100.0 55840 7553 1.333 ! Near Maximum !
Hodgdon H4350 95.8 64.5 4.18 2348 98.8 55840 8138 1.334 ! Near Maximum !
IMR 4350 94.1 64.4 4.17 2347 98.8 55840 8122 1.334 ! Near Maximum !
Your rifles might be unusual? Had read repeatedly that the very slow twist rate in 358's tended to peter out about 250 grain bullet length? Woodleigh Weldcore are very good bullets, I think, but need to be stabilized like any other bullet - are you okay with those bullet length to your barrel's twist rate??

If the twist rate is 1:14 or faster it should do ok.
Code:Cartridge : .358 Norma Mag. Bullet : .358, 310, Woodleigh SN WeldCore 54 Useable Case Capaci: 74.644 grain H2O = 4.847 cm³ Cartridge O.A.L. L6: 3.346 inch = 84.99 mm Barrel Length : 24.0 inch = 609.6 mm Predicted Data for Indicated Charges of the Following Powders. Matching Maximum Pressure: 55839 psi, or 385 MPa or a maximum loading ratio or filling of 104 % These calculations refer to your specified settings in QuickLOAD 'Cartridge Dimensions' window. C A U T I O N : any load listed can result in a powder charge that falls below minimum suggested loads or exceeds maximum suggested loads as presented in current handloading manuals. Understand that all of the listed powders can be unsuitable for the given combination of cartridge, bullet and gun. Actual load order can vary, depending upon lot-to-lot powder and component variations. USE ONLY FOR COMPARISON ! 137 loads produced a Loading Ratio below user-defined minimum of 80%. These powders have been skipped. Powder type Filling/Loading Ratio Charge Charge Vel. Prop.Burnt P max P muzz B_Time % Grains Gramm fps % psi psi ms --------------------------------- ----------------------------------------------------------------- Alliant Reloder-26 100.2 74.1 4.80 2523 100.0 55840 9558 1.307 ! Near Maximum ! Vihtavuori N560 102.3 71.9 4.66 2469 96.6 55840 9703 1.298 ! Near Maximum ! Alliant Reloder-22 102.5 71.3 4.62 2455 98.3 55840 9392 1.304 ! Near Maximum ! IMR 7828 SSC 100.9 71.3 4.62 2452 96.9 55840 9370 1.293 ! Near Maximum ! Alliant Reloder-17 89.7 64.8 4.20 2440 100.0 55840 8363 1.308 ! Near Maximum ! Ramshot Magnum 102.8 77.0 4.99 2440 98.7 55840 9060 1.312 ! Near Maximum ! Alliant Reloder-23 104.0 70.0 4.54 2425 100.0 54065 8485 1.322 Alliant Reloder-16 95.7 64.1 4.16 2413 100.0 55840 8231 1.323 ! Near Maximum ! Alliant Reloder-19 98.8 68.0 4.40 2409 98.1 55840 8881 1.315 ! Near Maximum ! Ramshot Hunter 94.2 66.9 4.34 2408 99.7 55840 8635 1.321 ! Near Maximum ! Hodgdon H414 88.8 64.6 4.19 2397 99.3 55840 8600 1.327 ! Near Maximum ! Winchester 760 88.8 64.6 4.19 2397 99.3 55840 8600 1.327 ! Near Maximum ! Vihtavuori N550 90.7 63.8 4.13 2387 100.0 55840 8343 1.337 ! Near Maximum ! Hodgdon H4831 SC 100.2 69.7 4.52 2383 96.1 55840 8720 1.314 ! Near Maximum ! IMR 4831 98.1 64.6 4.19 2372 100.0 55840 8049 1.340 ! Near Maximum ! Hodgdon Hybrid 100V 96.1 64.0 4.15 2358 100.0 55840 7553 1.333 ! Near Maximum ! Hodgdon H4350 95.8 64.5 4.18 2348 98.8 55840 8138 1.334 ! Near Maximum ! IMR 4350 94.1 64.4 4.17 2347 98.8 55840 8122 1.334 ! Near Maximum !
Have not loaded for 358 Norma Mag. So would have to rely on Quickload, etc. as above. I am interested in what I read about twist rate though. I see folks discussing topic as if it about weight, but everything that I read says it is about length. Had shown previously that 7mm Hornady 175 grain is shorter than a 150 grain Partition. Here is a Hornady 174 grain flat base .312" bullet compared to a Woodleigh 174 grain flat base .312" bullet. The Woodleigh is .100" longer - 1.106" versus 1.007". I am still trying to understand if that difference in length is significant or not.
View attachment 444886




























