- Location
- Northern Ontario
now my next problem is i had soooo much fun shooting i ran through 20 rounds in no time...starting to get expensive...
accuracy question
- Thread starter nearnorthguy
- Start date
I received a set of sights yesterday from thegunworks and they slipped this flyer in the envelope. These are plastic core and appear to mushroom as good or better than a modern smokeless bullet.
I see what you mean about being expensive.
Cheers nessy
I see what you mean about being expensive.
Cheers nessy
- Location
- Northern Ontario
thats cheap! I paid 29.00 for 15 powebelts!!
In regarding that spit patch if you do so use a stainless steel replacement rod,as I had the wooden rod with the cleaning jag and cloth pull loose in the bore.
I tried everything to get it out bullet pullers,coiled springs,finaly just pulled the nipple and used a monopoly tiny funnel and loaded what i could in the chamber.
Put the nipple back in loaded a cap and pointed down range,and puffft sounded like a 22LR ,the end of the cleaning rod sailed about 20 feet.
In my opioun Wooden ram rods are for show only!
Bo
)
I tried everything to get it out bullet pullers,coiled springs,finaly just pulled the nipple and used a monopoly tiny funnel and loaded what i could in the chamber.
Put the nipple back in loaded a cap and pointed down range,and puffft sounded like a 22LR ,the end of the cleaning rod sailed about 20 feet.
In my opioun Wooden ram rods are for show only!
Bo
)
- Location
- Hillbilly shack in the boonies
3 to 5 inches is ok, if it were a Custom , I would want an inch to inch and half.
